Product Details
SPECIAL FEATURE
- Bed is made from25 grade cast iron of 180 BHN hardness, strictly inspected with microlevel, hardness tester and straight edge.
- Boring of head stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
- Apron is totally enclosed in oil bath system with lever type arrangement for automatic feeds.
- Hexagonal Shaped tail stock with hardened and ground spindle made from alloy steel having external and internal grinding.
- Instructions manual as per Indian standard IS-1878 (part-1) 1993
COLOUR OPTIONS
- Blue & White (Two Tone)
- Emerald Green
STANDARD ACCESSORIES
- Change Gear Set (Inch & mm)
- Steady Rest (ID 14″)
- Follow Rest
- Face Plate (Ø 21″)
- Chuck Plate (Ø 12″)
- Tool Post Key
- Centre Adaptor
- Dead Centre (2 Nos.)
- Head Stock Belt
- Motor Pulley
- Four Position tool post
EXTRA ACCESSORIES
- Dog or True Chuck
- Coolant Pump, Tank & Nozzle
- Quick Change Tool Post with tool holders
- Taper Turning Attachment
- Reverse-Forward Switch
- Electric Motor & V-Belt Set with Electricals
EXTRA FEATURES
- V-Belt taper Roller Bearing type / Flat / V-belt gun metal bush bearing type
- Norton Gear Box (Single Screw)
- Extra Bed Width 20”
- Extra Height of Centre 20”
- Extra Spindle Bore (From 4.1/8” to 6.1/8”)
- Any Special Requirement as per customer’s drawing.
TECHNICAL DATA
Specification | OS-1 | OS-2 | OS-3 | OS-4 | OS-5 |
---|---|---|---|---|---|
Bed: | |||||
Bed Type | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat | ||
Bed Length | 7′-0″ | 9′-0″ | 10′-0″ | 12′-0″ | 14′-0″ |
Bed Width | 457 mm(18″) | 457 mm(18″) | 457 mm(18″) | 457 mm(18″) | 457 mm(18″) |
Gap Length | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
Gap Length in front of face Plate | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
Capacity: | |||||
Height Of Centre | 406 mm (16″) | 406 mm (16″) | 406 mm (16″) | 406 mm (16″) | 406 mm (16″) |
Swing over Bed | 800 mm | 800 mm | 800 mm | 800 mm | 800 mm |
Swing over Gap | 1100 mm | 1100 mm | 1100 mm | 1100 mm | 1100 mm |
Swing over Cross Slide | 575 mm | 575 mm | 575 mm | 575 mm | 575 mm |
Admit Between Centre | 800 mm | 1400 mm | 1700 mm | 2300 mm | 2900 mm |
Movement of Cross Slide | 375 mm | 375 mm | 375 mm | 375 mm | 375 mm |
Movement of Compound Slide | 190 mm | 190 mm | 190 mm | 190 mm | 190 mm |
Main Spindle: | |||||
Spindle Nose (Threaded Type) | Ø 105 mm | Ø 105 mm | Ø 105 mm | Ø 105 mm | Ø 105 mm |
Taper Bore in Spindle Sleeve | MT-5 | MT-5 | MT-5 | MT-5 | MT-5 |
Spindle Bore | Ø 80 mm | Ø 80 mm | Ø 80 mm | Ø 80 mm | Ø 80 mm |
Tail Stock: | |||||
Quill Dia | Ø 90 mm | Ø 90 mm | Ø 90 mm | Ø 90 mm | Ø 90 mm |
Taper in Quill | MT-5 | MT-5 | MT-5 | MT-5 | MT-5 |
Quill Travel | 190 mm | 190 mm | 190 mm | 190 mm | 190 mm |
Speed: | |||||
No. of Spindle Speed | 8 | 8 | 8 | 8 | 8 |
RPM (Low/High) | 35 – 500 | 35 – 500 | 35 – 500 | 35 – 500 | 35 – 500 |
Threads: | |||||
Metric Thread | 13 (1 to 6 mm) | 13 (1 to 6 mm) | 13 (1 to 6 mm) | ||
Inch | 20(1 to 24 TPI) | 20(1 to 24 TPI) | 20(1 to 24 TPI) | 20(1 to 24 TPI) | 20(1 to 24 TPI) |
Lead Screw Dia & Pitch | 2″ x 2 TPI | 2″ x 2 TPI | 2″ x 2 TPI | 2″ x 2 TPI | 2″ x 2 TPI |
Electricals: | |||||
Motor Power | 5 HP | 5 HP | 5 HP | 5 HP | 5 HP |