Product Details
SPECIAL FEATURE
- Bed is made from25 grade cast iron of 180 BHN hardness, strictly inspected with microlevel, hardness tester and straight edge.
- Boring of head stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
- Apron is totally enclosed in oil bath system with lever type arrangement for automatic feeds.
- Hexagonal shaped tail stock with hardened and ground tail stock spindle made from alloy steel having external and internal grinding.
- Instruction manual as per Indian standard IS-1878 (Part-1) 1993.
COLOUR OPTIONS
Bayer Blue & Silver Grey / Blue & White (Two Tone)
STANDARD ACCESSORIES
- Change Gear set (Inch & mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Dead Centre (2 Nos.)
- Head stock belt
- Motor Pulley
- Four Position Tool Post
EXTRA ACCESSORIES
- Dog or True Chuck
- Electric Motor & V – Belt with Electrical
- Coolant Pump, Tank & Nozzle
- Quick Change Tool Post with tool holders
- Taper Turning Attachment
- Reverse – Forward Switch
- Steady Rest
- Follow Rest
- Face Plate
EXTRA FEATURES
- Notron Gear Box (Single Screw / Double Screw)
- Any Special Requirement as per Customer’s Drawing.
TECHNICAL DATA
Specification | 215 UND-1 | 215 UND-2 | 215 UND-3 |
---|---|---|---|
Bed: | |||
Bed Type | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat |
Bed Length | 1375 (4′ 6″) | 1600 (5′-3″) | 1825 (6′) |
Bed Width | 280 mm (11”) | 280 mm (11”) | 280 mm (11”) |
Gap Length | 110 mm | 110 mm | 110 mm |
Gap Length in front of Face Plate | 105 mm | 105 mm | 105 mm |
Capacity: | |||
Height Of Centre | 215 (8.5″) | 215 (8.5″) | 215 (8.5″) |
Swing over Bed | 410 mm | 410 mm | 410 mm |
Swing over Cross Slide | 260 mm | 260 mm | 260 mm |
Swing in Gap | 610 mm | 610 mm | 610 mm |
Admit Between Centre | 520 mm | 740 mm | 960 mm |
Movement of Cross Slide | 220 mm | 220 mm | 220 mm |
Movement of Compound Slide | 110 mm | 110 mm | 110 mm |
Main Spindle: | |||
Spindle Nose (Threaded Type) | Ø 76.2 mm | Ø 76.2 mm | Ø 76.2 mm |
Taper Bore in Spindle Sleeve | MT-4 | MT-4 | MT-4 |
Spindle Bore | Ø 54 mm (2.1/8″) | Ø 54 mm (2.1/8″) | Ø 54 mm (2.1/8″) |
Tail Stock: | |||
Quill Dia | Ø 50.8 mm | Ø 50.8 mm | Ø 50.8 mm |
Taper in Quill | MT-3 | MT-3 | MT-3 |
Quill Travel | 150 mm | 150 mm | 150 mm |
Speed: | |||
No. of Spindle Speed | 8 | 8 | 8 |
RPM (Low/High) | 35 – 500 | 35 – 500 | 35 – 500 |
Threads: | |||
Metric Thread | 13 (1 to 6 mm) | 13 (1 to 6 mm) | 13 (1 to 6 mm) |
English Thread | 19 (2 to 24 TPI) | 19 (2 to 24 TPI) | 19 (2 to 24 TPI) |
Lead Screw | Ø 1.25″ x 4 TPI | Ø 1.25″ x 4 TPI | Ø 1.25″ x 4 TPI |
Electricals: | |||
Motor Power | 2 H.P. / 1.5 KW | 2 H.P. / 1.5 KW | 2 H.P. / 1.5 KW KW |
Drive: | |||
V Belt | B – 70 | B – 70 | B – 70 |
General: | |||
Weight (Approx.) | 650 Kg. | 750 Kg. | 825 Kg. |
Floor Space Occupied in (mm) | 1675 x 540 | 1800 x 540 | 2125 x 540 |
(Approx.)L x W x H | x 1160 | x 1160 | x 1160 |