Products

  Summits Hygronics Manufactures Refrigerated Air Dryers which can remove moisture level in Compressed Air up to 580 ppm(w) (3ºC Dew Point). Summits Refrigerated Air Dryer has the state of art technology to which works on minimum power and pressure drop. The dryers manufactured are highly reliable and works trouble free for decades.

  Heatless Air Dryers Manufactured by Summits removes the water vapour in a Compressed Air stream to a level of 78 ppm(w). Heatless Air Dryers has very few moving components and can work trouble free for decades. Paramedical, Food Processing, chemical, cement and industries that require dew point of compressed air around -40°C use Heatless Air Dryers.   Summits Heatless Air dryers has an Energy Economiser, it reduces the purge air consumption which in turn reduces the operating cost of the compressed air system. The Dryers are filled with high quality desiccants which give high performance and long life.  

  Summits Hygronics manufactures Medical Oxygen Generators which can provide uninterrupted high purity oxygen gas based on the demand. These oxygen generators works on the principle of Pressure Swing Adsorption (PSA) and it can save a lot of energy spent in the conventional Cryogenic Oxygen Generation plants. These PSA based Medical Oxygen Generators can create sufficient oxygen for a person or a group of people to use immediately, and these units are in widespread usage for onsite oxygen in hospitals and health care areas, with the advantage of being continuous supply without the need for additional deliveries of bulky cylinders.  

  Summits Hygronics manufactures Nitrogen generators which can provide uninterrupted high purity nitrogen gas based on the demand. These Nitrogen generators works on the principle of Air Separation and it can save a lot of energy spent in the conventional cryogenic Nitrogen generation plants. Summits Nitrogen generators work efficiently in various industries including food and beverages, heat treatment, laser cutting and pharma industries. The use of Nitrogen gas instead of air in a process may surprisingly increases the efficiency or effectiveness of the process or product. Their applications are boundless, Summits R&D and marketing team is exploring the application of N2 gas for various applications day by day.  

  The condensate drips through the feed line and gets collected in the container. Initially, the discharge valve will be closed. When the container is filled with condensate, the operating sensor signals at the maximum point; the discharge valve opens; forces the condensate out to the discharge line. When the condensate comes to a minimum level, the discharge valve closes before the air passes through dirt screen and filters all debris. If the debris chock the dirt screen the level raises above the maximum point and reaches the alarm point. The alarm sensor gets triggered gives a signal to the controller. and activates the alarm indication. There is a breather line which avoids airlock and assists the steady flow of condensate to the container.    

  Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Summits Compact Desiccant type Heatless Air Dryers remove the moisture to a level of 80 ppm(w) by using pressure swing adsorption technology. The wet air enters into one desiccant tower and gets dried by the high performance desiccant adsorbent. The dry air passes through inbuilt filters and check valves to the utility. A portion of dry air (depending on the operating pressure and required dew point temperature) passes through an orifice into the other saturated tower at...

  The Ultrafilter HD high pressure filter housings are designed for the purification of compressed air and gases. Due to the modular design of the housings different filter elements can be used. A multitude of housings with different connections, allow to match the requirements of the application, e. g. the compressor size. This product series offers 8 different housings ranging from a volume flow of 30 m3/h to 720 m3/h, in the pressure stages PN 25 to PN 400 (related to 7 bar (ü) and 20°C).  

  Compressed air contains considerable quantity of moisture in vapour form. The vapour will condense into liquid when the temperature drops. This will be the major cause of downtime in compressed air systems. The only way to prevent condensation is to reduce the dewpoint temperature which is only possible by installing a suitable compressed air dryer. Summits with its rich experience provides innovative solutions to produce dry air by means of using desiccant adsorption technology.    

  Compressed air contains considerable quantity of moisture in vapour form. The vapour will condense into liquid when the temperature drops. This will be the major cause of downtime in compressed air systems. The only way to prevent condensation is to reduce the dewpoint temperature which is only possible by installing a suitable compressed air dryer. Summits with its rich experience provides innovative solutions to produce dry air by means of using desiccant adsorption technology.