Products

Three pole with two phase switching Control status LED indication Two control input ranges: 24 VAC/DC, 90-253 VAC Motor rating up to 3kW (3.0 HP) Rated Operational Voltage up to 600 VAC Opto-isolation at 4kVrms Mechanical Contactor resemblance with covered heatsink DIN-rail and panel mounting

Low inrush and reduced vibration during starting Rated operational voltage: up to 600 VAC, 50/60 Hz LED status indicators Device over-temperature protection DIN rail mounting RSHR MIDI  2-phase control with integral bypassing of semiconductors Rated operational current: up to 18A AC-53b Multivoltage option with a range of 190 - 530 VAC* Optional auxiliary relay for end of ramp  RSHR  Integrated bypassing of semiconductors Rated operational current up to 45A AC-53b Motor PTC protection RSHR 3-Phase Control of all 3 phases In Line or In Delta motor connection External power supply option for a wide operational voltage range Rated operational current: up to 32A AC-53a Motor PTC protection

Provides up to 60% reduction in current and increases compressor lifetime! Eliminate light flickering, voltage disturbances and stress on the compressor Avoid high-energy tariffs by maintaining starting current below fixed limits Optimized performance for scroll compressors Integrated current limit feedback for inrush current reductions Reduced mechanical stress Integrated diagnostic features for safe operation at all times! Rated operational voltage: 230 VACrms, 50/60 Hz Rated operational current: up to 32A: AC-53b Complies with EMC Class B (residential) requirements Inrush current reduction up to 60%! Integral bypassing of semiconductors Built-in transient over voltage protection Under voltage protection after ramp up DIN rail or panel mount EMC...

Motor protection: Thermal image, phase loss and sequence, current imbalance, locked rotor, earth fault - Electrical variables monitoring and datalogging: current, voltage, harmonic distortion, power, energy - Motor control: start-stop, start-delta, emergency starting - Fast connection to Modbus TCP/IP and Profibus to transmit all instantaneous variables and alarms to a central control system.

Carlo Gavazzi offers a comprehensive range of electromechanical relays for industrial automation. They are available in plug-in and PCB mounting. Many of our relays come standard with a push-to-test button as well as a LED indicator. Carlo Gavazzi relays are frequently used in control panels, in HVAC control systems, pump and compressor control, and electronic and consumer products. They are typically used to switch loads such as heaters, lights, and motors. Furthermore, Carlo Gavazzi offers a complete range of sockets (DIN-rail mounting) for industrial and PCB relays.

Compressor control relay Switching capacity 30A DC coils 6 to 48VDC AC coils 24 to 277VAC 2 normally open contacts,2 change over contacts Reinforced insulation 4KV/8mm(0.31") Meets class F construction PCB or Fast-on terminal General purpose, Power loads Standard as sealed.

High switching power Small size Wide range of application 5 A switching capacity 4 poles configuration AC coils 6 to 230 VAC DC coils 5 to 110 VDC 1.5 KV dielectric coil to contacts Au-clad contact available Conform to the CE low voltage directive UL, VDE, CSA approved Standard with LED, Push with arm and Flag

3-phase monitoring relay for phase sequence and phase loss Detects when all phases are present and have the correct sequence Measures own power supply Power supply range: 208 to 480 VAC (±15%) Output: 5 A SPDT relay (DPA51) or 5 A DPDT relay (DPA71) normally energized For mounting on DIN-rail in accordance with DIN/EN 50 022 17.5 mm (DPA51) or 35.5 mm (DPA71) DIN-rail housing (DIN 43880) LED indication for relay and power supply ON

TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect when all 3 phases are present and have the correct sequence Detect if all the 3-phase-phase or phase-neutral voltages are within the set limits Detect if asymmetry and tolerance are within the set value Separately adjustable set points Separately adjustable delay functions (0.1 to 30 s) Output: 2 x 8 A relay SPDT NE For mounting on DIN-rail in accordance with DIN/EN 50 022 (DPC01) or plug-in module (PPC01)  45 mm Euronorm housing (DPC01) or 36 mm plug-in module (PPC01) LED indication for relays, alarm and power supply ON

Pump alternating relay for 2 or 3 pumps Output: 5 A SPST relay For mounting on DIN-rail in accordance with DIN/EN 50 022 35.5 mm DIN-rail housing LED indication for relay and power supply ON Galvanically separated power supply Built-in delay for the second or third pump in case simultaneous activation is required Built-in function for automatic rotation of the pumps

1/16 DIN and 1/32 DIN NEMA 4X protection Autotune automatically sets PID parameters Single ramp/soak program  Heat-cool operation AC or DC power supply Inputs: Thermocouple, RTD, 0-50mV Two outputs: SSR voltage pulse/relay Five alarm modes RS232 or RS485 (retrofittable) MODBUS RTU protocol

TRMS load guard relays for three phase balanced applications Measuring if the power factor is within set limits Measure voltage on own power supply Measuring ranges: 5A, 10A, MI current transformers Power ON delay 1 to 30 s knob adjustable Separately adjustable upper/lower level on absolute scale Programmable latching or inhibit at set level Automatic and manual start and stop of the system Output: 8 A SPDT relay N.D. or N.E. selectable For mounting on DIN-rail in accordance with DIN/EN 50 022 (DWB01) or plug-in module (PWB01)  45 mm Euronorm housing (DWB01) or 36 mm plug-in module (PWB01) LED indication for relay, alarm and power supply ON

Over/under frequency monitoring relays Measuring if power supply frequency is within set limits Measure on own power supply Measuring ranges Voltage: 24 to 240 VAC Frequency: 50 - 60 Hz Separately adjustable upper/lower level on relative scale Adjustable delay on alarm or on recovery (0.1 to 30 s) Programmable latching or inhibit at set level Output: 8 A SPDT relay N.D. or N.E. selectable For mounting on DIN-rail in accordance with DIN/EN 50 022 (DFB01) or plug-in module (PFB01)  22.5 mm Euronorm housing (DFB01) or 36 mm plug-in module (PFB01) LED indication for relay, alarm and power supply ON

Under Voltage Relay TRMS AC/DC over or under voltage monitoring relays Selection of measuring range by DIP-switches Measuring ranges from 0.1 to 500 V AC/DC Adjustable voltage on relative scale Adjustable hysteresis on relative scale Adjustable delay function (0.1 to 30 s) Programmable latching or inhibit at set level Output: 8 A SPDT relay N.D. or N.E. selectable For mounting on DIN-rail in accordance with DIN/EN 50 022 (DUB01) or plug-in module (PUB01) 22.5 mm Euronorm housing (DUB01) or 36 mm plug-in module (PUB01) LED indication for relay, alarm and power supply ON

Current Relay AC/DC over voltage monitoring relay Selection of measuring range by DIP-switches Measuring ranges: 2 to 20 VAC/DC, 5 to 50 VAC/DC, 20 to 200 VAC/DC, 50 to 500 VAC/DC, 0.4 to 4 Vp AC Adjustable voltage limit on relative scale Adjustable hysteresis Programmable latching at set level Output: 8 A SPDT relay normally de-energized For mounting on DIN-rail in accordance with DIN/EN 50 022 (DUA01) or plug-in module (PUA01) 22.5 mm Euronorm housing (DUA01) or 36 mm plug-in module (PUA01) LED indication for relay and power supply ON Galvanically separated power supply

17.8 MM Slim SSR With Heatsink Zero cross switching AC solid state relay Rated Operational voltage: Up to 600Vrms Rated Operational current: Up to 30Arms Up to 1800s for I2t Control voltages: 3-32 VDC, 20-275 VAC (24-190VDC) Input connection: Screw terminal Output connection: Box clamp Design according to IEC/EN60947-4-2, IEC/EN60947-4-3, IEC/EN62314, UL508, CSA22.2 No. 14-10Integrated voltage transient protection with varistor RoHS compliant 100 kA short circuit current rating according to UL508 VDE approval Option for DIN mounting (RGS-DIN)

Solid State Contactors Product Width ranging from 17.5mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 85AAC @ 40°C Up to 6600A²s for I²t and 1200Vp blocking voltage Control voltages: 3-32 VDC, 20-275 VAC (24-190 VDC) IP20 protection Design according to EN/IEC60947-4-2, EN/IEC60947-4-3, EN/IEC62314, UL508, CSA 22-2 No. 14-10 Integrated voltage transient protection with varistor RoHS compliant Short circuit current rating: 100kA VDE approval Germanischer Lloyd approval1

Ssr With Fieldbus Communication AC semiconductor contactor MODBUS RTU interface over RS485 RJ45 sockets for easy installation Dual sockets for daisy chaining Multi-function  4 selectable modes of operation: ON/OFF, Phase angle, Distributed full cycle, Burst firing Operational ratings up to 50 AACrms and 230 VAC Temperature monitoring with over-temperature protection Opto isolation: > 4000 VACrms LED status indication

DC Solid State Relay for PCB mounting Rated operational current: Up to 8 ADC Rated operational voltage: Up to 350 VDC Surface mount technology Flexible encapsulation for extended life Control voltage: 4.25 to 32 VDC Insulation (Input - Output): 4000 VACrms

Ssr With Current Measurement AC semiconductor contactor Integrated current monitoring Zero switching (RJCS1A) Direct copper bonding (DCB) technology LED-indication Cage clamp output terminals 4-32 VDC control input Operational ratings up to 50 AACrms and 600 VAC Local and remote alarm status Set-point adjustable Time delay adjustable Local and remote setup

Hybrid relay: Solid State Relay / Electromechanical Relay Operational ratings up to 230V, 20A ACrms Integral bypassing of semiconductors Internal over-temperature protection Compact 17.5mm wide housing Standard modular design DIN rail mounting No need for external heatsink Minimum audible noise Fit and forget: millions of switching cycles Ideal for switching of single phase loads in residential buildings

AC Solid State Relay Analog switching (phase-angle control) for resistive and slightly inductive load applications 4 - 20mA or 0 -10V control input Rated operational current: 25, 50, 75 and 100 AACrms Rated operational voltage: Up to 600 VACrms Variable intensity LED-indication according to input current Integral snubber network Polarized lockable control connector for safe connection for voltage controlled version

Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding (DCB) technology LED indication Built-in varistor 230, 400, 480, 600V Clip-on IP 20 protection cover Self-lifting terminals Housing free of moulding mass 2 input ranges: 3-32* VDC and 20-280VAC/22-48VDC Operational ratings: Up to 100AACrms and 600VACrms Blocking voltage: Up to 1400Vp Opto-isolation: > 4000VACrms

Solid State Relay  Carlo Gavazzi's solid state relays range includes single phase relays up to 125 amps and 3 phase relays up to 75 amps. They are available with both digital and analogue inputs (4-20 mA or 0-10 V) Furthermore, we also offer a complete range of SSR's with a built-in heatsink. DC Solid State Relay Rated operational current: 1 and 5 ADC Operational voltage range: Up to 350 VDC Input range: 3 to 32 VDC Isolation: OPTO (input-output) 4000 VACrms

Din Rail Ssr AC Semiconductor contactor Two and three pole switching types Direct copper bonding (DCB) technology LED indication Integrated over-voltage protection Housing free of moulding mass 2 Input ranges: 5 - 32 VDC and 24-275VAC/24-190VDC Operational ratings: up to 3x32AAC, 600VAC Blocking voltage: Up to 1200Vp Opto-isolation > 4000 VACrms

Single Phase Ssr DC Solid State Relay Rated operational current: 1 and 5 ADC Operational voltage range: Up to 350 VDC Input range: 3 to 32 VDC Insulation: OPTO (input-output) 4000 VACrms

We are authorized distributor in india for Carlo Gavazzi, fotek, meanwell. We are dealing wide range of solid state relays from 25-200amps both single and three phase solid state relays. Even we have analog SSR which can be used in several applications like heaters control etc. our solid state relays have all kind of approvals like CE, ROHS etc.