Century's Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It consists of an ink-filled aluminum body and a valve-acting pen for smooth ink flow. The ink has very few traces of chloride, sulfur, low-melting point metals and halogens that will not contaminate or damage the surface being marked. The ink formulation meets or exceeds the specifications of GE Nuclear Energy, GE Aircraft Engines, and the US Energy Research and Development Administration (Nuclear Grade). You can mark on all surfaces, including metal, plastic, steel, ceramic, glass, concrete, etc. The marks do not fade or wash off under harsh weather conditions and heat as well. It is ideal for welding, aeronautical industries,

Tip size:  2mm

Available Colors:  White, Black, Red, Yellow

Advantage:

• Valve action paint marker with hard aluminum body and cap on top.
• Permanent and weather resistant markings on all surfaces.
• The ink formulation is not uncertain or adversely affects the surface being marked.
• Works on all surfaces such as steel, metals, alloys, plastics, glass, concrete, etc.
• It confirms the Standards of GE Nuclear Power, GE Aircraft Engines and the US Energy Research and Development Administration.
• Ideal for welding, aeronautical industries, marine industries, power plants, automotive plants, and oil and natural gas refineries

Directions of use:

• Cap open Shake marker well before first use.
• To push in the ink, press the nib a few times until you see the ink on the nib.
• Replace the cap after each use.

Caution:

• Avoid contact with eyes or flames.
• Ink is harmful if consumed.