Century's Everon Pen is a fine point fabric marker used in the textile industry and laboratories for fabric shrinkage testing. It has a hard aluminum body filled with ink and a rubber valve on the bottom, when pumped slightly pushes the ink towards a fine ball point for sharp, fine marks. It is widely used in laboratories and textile mills to verify the dimensional stability (shrinkage) of fabrics with a grooved template after washing and processing into fabrics. It is similar to dalo texpen in many parts of the world. It comes with two types of tips: plastic (1.5mm) and stainless steel (1.2mm).

Ink content:  30 ml

Available colors:  Yellow, red, black, blue, orange, green, white, pink * and purple * (* - make orders)

Advantage:

• Hard aluminum body to prevent breakage, leakage and puncture.
• Orient to use and smooth the flow of ink due to the rubber valve at the bottom.
• Fine-tip allows marker to fit within slotted templates for fabric shrinkage testing.
• Marks remain permanent even after staining, bleaching, washing, and other finishing processes.
• Works on all synthetics, cotton, denim, wool, polyester, linen, knit, etc.

Address of Use:

• Remove the cap. For cold start, press the rubber ball / valve 4-5 times at the bottom for ink flow at the tip.
• Mark vertically at a 90 degree angle and make sure the ball presses against the surface for a smooth flow of ink.
• As the pressure reduces, press the rubber valve 2-3 times to continue writing.
• Do not press the rubber bulb when not in use as it will increase the ink pressure.
• Clean the tip and replace the cap when after each use.

Caution:

• Harmful if swallowed or intentionally inhaled.
• Avoid eye contact.
• Keep away from open flame.
• Test before use