The Century Tex Marker® is an ink-filled aluminum folding writing device used to mark fabric samples for identification. It is used by textile factories and processing houses prior to gray fabric dyeing and finishing processes for identification, quality control, shrinkage, theft etc. The marking remains permanent, bright and opaque even after the dyeing and finishing processes are completed. It is widely used in the textile industry for dyeing, bleaching, hosiery, knitting, scrubbing and weaving processes.

Available colors:  Yellow, Red, Black, Blue, Orange, Green, White, Purple * and Violet * (* Make order)

Advantage:

• Bright and opaque marks on all types of fabrics, such as cotton, denim, polyester, wool, etc.
• Permanent, heat resistant, quick drying and no bleeding.
• Resistance to acids, alkalis and other chemical attacks in finishing processes.
• Brands can withstand all textile grading / finishing and finishing processes.
• Quick batch identification on dark-dyed fabrics as well.
• The most economical method of marking on gray fabrics before processing.
• Available in 3 ball sizes for different types of fabrics

Ink content:

• 60 ml (70 g)
• Key provided to remove marker ink for optimal utilization and smooth flow.

Address of Use:

• Open lid
• Insert the aluminum wrench provided with the marker into the bottom end of the tube and start rolling up to get pressure.
• Mark at a 90 degree angle for smooth ink flow. Keep turning the key as the pressure is reduced.
• Do not kink the tube back and forth as this may cause puncture.
• Do not use it on any surface other than fabrics.
• Replace the cap after use.