The Century's Pump-type metal marker is a unique marking device for permanent, fade-proof marking on any surface. It is an industrial grade ball point marker that is glossy, opaque, and weather resistant. It has a rigid aluminum body that makes it difficult to break, puncture or leak. It also has a rubber valve on the bottom for even ink flow. When the valve is pumped, it compresses the ink to a fine ball point for smooth flow and easy writing.
Marks made by the marker will not peel / peel / fade or rub off, and can withstand heat and weather in harsh conditions. It has a special viscous ink formulation similar to paint that remains permanent on steel, alloys, metals, concrete, glass, rubber, wood and even plastics. You can mark wet, dry, dusty, oily, greasy, and even extremely rough surfaces with ease.
Available colors: Yellow, white, black, blue, red, green, orange-violet *.
Tip sizes:
- Point n. 2: 2.5mm markings
- Point n. 3: 3mm markings
- Point n. 4: 4mm markings
Advantage:
- Viscous ink produces permanent, glossy and opaque marks on all surfaces, including metals, steel, glass, rubber, wood, concrete, etc.
- The hard aluminum body makes it difficult to break, puncture or leak compared to other tube markers.
- The rubber valve on the bottom makes it very easy to use with a continuous flow of ink.
- Zero Wastage compared to Tube type markers.
- Ball-tipped stainless steel tip allows for easy, smooth marks on wet, oily, dry, greasy, and extremely rough surfaces.
- 60ml ink content (5-6 times of conventional paint markers)
Address of Use:
- Remove the cap. For cold start, press the rubber ball / valve 4-5 times at the bottom for ink flow at the tip.
- Mark vertically at a 90 degree angle and make sure the ball presses against the surface for a smooth flow of ink.
- As the pressure reduces, press the rubber valve 2-3 times to continue writing.
- Do not press the rubber bulb when not in use as it will increase the ink pressure.
- Clean the tip and replace the cap when after each use.
Caution:
- Harmful if swallowed or intentionally inhaled.
- Avoid eye contact. Keep away from open flame.
- Please test before using.
