Products

Booster Pumps Modern technologies have brought a high degree of comfort to people within their homes by providing a strong water supply. Grundfos offers complete tailored pressure boosting systems for domestic water supply that ensure optimal water pressure for household applications. CM Booster, CME Booster comes in different versions: CME Booster CM Booster PM2  CM Booster PM1  CM Booster PT  CM Booster PS    The CME Booster provides constant water pressure for a variety of domestic applications. This means that the end-user is no longer bothered by fluctuations in water pressure due to a rise or fall in demand, or from pump starts and stops. CME Booster keeps the pressure within the home up regardless of usage. The constant...
Hydro Pneumatic System  The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 352 controller, they handle even the most difficult boosting jobs with ease and accuracy. All components have been combined with focus on quality and efficiency. The Grundfos Hydro MPC booster systems are designed to last: sturdy, compact units with easy access to all service parts. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. Each booster model has been designed to meet specific customer demands for capacity and control. The intelligent cascade control ensures that the optimum number of pumps required to meet the demand runs at any time. Together with the CR with IE3 motors, this makes the Hydro MPC the most...
Horizontal End Suction Pump  Grundfos end-suction pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation. Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC and irrigation.   The Grundfos NB/NBG pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The NB/NBG range consists of close-coupled pumps with their main dimensions in accordance with either EN733 or...
Boiler Feed Pumps  The CR range offers pumps of unmatched reliability that can be intelligently tailored to suit an infinite variety of applications. Since Grundfos invented this type of multistage in-line pump in 1972, many imitations have appeared on the market. However, four decades on, this latest generation of CR pumps, with their traditional efficiency, reliable performance and adaptability, remain the wisest choice.   The basic CR pump range is available in four different materials: cast iron, two grades of corrosion-resistant stainless steel, and all-titanium. There are 13 flow sizes, capable of producing up to 50 bar of pressure, and with a variety of shaft seals and rubber materials. The modular building system means you can choose a version to meet almost any...
Shower Booster Pump The MAGNA/UPE pumps make up a broad range of small, medium and large circulator pumps fitted with communication equipment and motors with electronic speed control based on permanent magnet (PM) and compact stator motor technology. The MAGNA is an innovative member of the Grundfos family of high-quality circulator pumps. With a MAGNA, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the factory setting, AUTOADAPT (MAGNA only). The MAGNA will automatically analyse the heating system, find the optimum setting and then continuously adjust its operation to changes in demand. The result is optimum comfort and minimum energy consumption. In addition, MAGNA pumps are extremely flexible and reliable, and have low...
Twin Booster Pumps    Committed to fulfill all the desired requirements of our clients through high-value products, we are engaged in supplying Twin Booster Pumps in Aligarh. These boosters are used where fast pump down times are required and environment or energy usage concerns rule out any alternative pump selection. We procure the boosters from the trusted and reliable vendors of the market. Our quality inspectors check the Twin Booster Pumps on leak tightness and performance parameters to offer a defect free range to the clients.
Brand Name : Bee Gee Associates Product : NK Pumps
CM Pumps The horizontal multistage pump CM (=Centrifugal Modular) has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application. The pumps are of the close-coupled type. The difference between the CM and the CME pump ranges is the motor. CM pumps are fitted with mains-operated motors, whereas the motors for CME pumps have an integrated frequency converter. Both CM and CME pumps have mechanical shaft seals. The CM and CME pumps are available in cast iron or stainless steel (AISI 304/DIN 1.4301 stainless steel, which is for water and non-corrosive...
AP Drainage Pumps The Unilift AP and Unilift AP Basic are  drainage pumps designed for both temporary/portable installation and permanent free-standing installation. These single-stage pumps are made mostly of stainless steel. All types are available in either single phase or three phase versions and for 50 or 60 Hz power supply. The number in the type designation, e.g. AP12, indicates the spherical particle size that can pass through the pump. All Unilift AP and AP Basic pumps are fitted with a plug for connection to the mains.   Unilift AP is a single stage pump with either semi-open impeller (AP12) or with vortex impeller (AP35 and AP50). All Unilift AP pumps are fitted with a stainless steel sleeve for cooling during operation. The strainer at the...
DWK/DPK- Dewatering Pumps DWK and DPK are Dewatering  pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations. Applications DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for...
Product: FEKA - Dewatering - Drainage Pumps
SEG-grinder pumps  The SEG range of grinder pumps  The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable. Pressurised systems are the perfect choice for transfer of effluent and sewage, and the SEG range combines cost-effectiveness with maximum protection for the environment by facilitating the use of smaller pressure pipes for minimal investment costs. The SEG range is designed to reduce energy consumption and to keep downtime costs to a minimum, while maintaining peak performance throughout the system life. Applications The Grundfos SEG pumps are specifically designed for pumping...
Product : SL-SV- Sewage - Drainage Pumps
Dosing Pump Grundfos DME Digital Dosing pumps combine perfect precision with user-friendliness, covering large dosing quantities in the range from 60 l/h to 940 l/h with few variants. Digital Dosing The use of stepper motor/EC drives optimizes control of the stroke speed and makes it extremely accurate. The duration of each pressure stroke varies according to the flow setting. The suction stroke time always remains constant but can be lengthened using the anti-cavitation function and thus adapted to the relevant needs. This way suction always takes place with the full stroke volume. This results in continuous dosing and lower pulsation in the dosing system – important factors in ensuring smooth pumping of outgassing media and in installations requiring longer suction...
The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.  The independent bearing housing allows for ease of maintenance without removing the top casing. The double volute design reduces the radial load on the shaft, extending component life, minimising vibration and providing quiet operation. The HS pump also offers high pump efficiencies throughout the range.  High energy efficiency along with long pump life and easy maintenance add up to low life-cycle costs. The HS pump is available in three configurations...
Being a renowned name in this field, we are engaged in supplying an exclusive range of F&B HYGIA Pumps. The pumps are widely used in Beverage industry -Breweries, Juice Production ,Soft drink, Distilleries,Wineries. We procure the pumps from the most authentic vendors of the market, with the help of our expert procuring agents. Our quality inspectors check the  F&B HYGIA Pumps on quality and performance parameters to provide a defect free range. Feature: Hygienic design   Smooth surface Longer service life
Inline Pump  Grundfos vertical in-line volute pumps are used in commercial buildings for air conditioning and heating applications. The pumps are all single-stage, in-Line centrifugal pumps with standard motor and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pumps and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type. Backed with know-how and intellectual capacity in this domain, we are counted as a leading supplier of an exclusive range Inline Pump. These pumps find application in water supply, drainage systems, water treatment plants, and air conditioners. Manufactured at the vendor's end, we procure the pumps with the help of expert procuring...
Grundfos™ MTA range of single-stage immersible pumps has been designed especially for filtering systems in the machine tool industry. These low-pressure pumps are available in 9 different variants and come with a choice of top suction or bottom suction.The pumps are designed to be mounted on top of tanks with the pump part immersed into the pumped liquid. The pump is designed to be maintenance free, and therefore does not contain shaft seals or other wear parts. The compact MTA pumps efficiently transport liquid containing chips, fibres and abrasive particles to the filtering unit. Semi-open impellers allow the passing of chips up to 0.39 inches, making the pumps ideal for removing liquid from machining...
Product : Disinfection System- Chlorine-Di-Oxide Generator


Bee Gee Associates All Rights Reserved.