Products & Services
10 items available · Search by name, SKU, or HSN code
MOQ: 1 unitsTransparent Silicone Rubber for Resin Diamond Molding
<p><strong>Transparent Silicone Rubber for Resin Diamond Molding </strong><strong>Description</strong></p> <p> </p> <p>Transparent Silicone Rubber for Resin Diamond Molding for all kinds of jewelry, crystal deocarations molding . It’s generally named two-components silicone rubber which will be cured by heated temperature, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1.</p> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Application</strong></p> <p> </p> <p><u>Transparent Silicone Rubber for Resin Diamond Molding is rapid prototyping for imitational crystal diamond, resin diamond decorations, also suitable for molding epoxy resin, polyester resin, polystyrene, vinyl, paraffin wax, low melting point alloy, concrete and so on, also used in cultural relics, copy and art crafts.</u></p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Technical Parameters </strong></p> <table align="center" border="1" cellpadding="0" cellspacing="0" style="width:514px"> <tbody> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Model</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> HY-MJ2135</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">HY-MJ2235</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Appearance</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> translucent</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> transparent</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Mixing ratio</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">1:1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">1:1</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Viscosity (CPS)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">70000</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">70000</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Pot life(25°C)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">>2-3h</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">>2-3 h</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Curing time(°C/mins)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">100-120°C/30mins</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">100-120°C/30mins</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Density (g·cm-30</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">1.1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">1.1</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Hardness(A°)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">35</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">35</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Enlongation-break (%)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> ≥280</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> ≥320</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;"> Tear-strength (KN·m-1)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">≥15</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">≥18</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Tensile-strength (Mpa)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> ≥4.8</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> ≥5.2</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Retractility (%)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">0.1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">0.1</p> </td> </tr> </tbody> </table> <div style="clear: both;"> </div> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Characteristics </strong></p> <p> </p> <p>*Body safe, skin safe, medical grade, nontoxic.</p> <p> </p> <p>*High tensile and tear strength</p> <p> </p> <p>*High temperature resistance, can resist more then 250°C</p> <p> </p> <p>*Easy for operation (mixing ratio at 1:1 /10:1)</p> <p> </p> <p>*Easy demoulding</p> <p> </p> <p>*Good dimensional stability</p> <p> </p> <p>*Rapid prototyping</p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Package</strong><br /> <strong>40</strong>Kgs/pail as a set (Part A 20Kg + Part B 20Kg)</p> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Shelf life and Transportation</strong></p> <p> </p> <p>1. Twelve(12) months when stored at 25C in tightly closed original packages.</p> <p> </p> <p>2. This kind of product is non-dangerous product, which could be transported as general chemicals.</p> <p> <a name="_GoBack"></a></p> <p> </p> <p> </p> <p><strong>More details of Transparent Silicone Rubber for Resin Diamond Molding, pls feel free to contact </strong><strong><u>Ms kaka</u></strong><strong>:</strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-5249c4
MOQ: 1 unitsBlack Color PCB Electronic Potting Silicone HY-215
<p> </p> <p><strong><u>Technical Parameters for PCB Electronic Potting Silicone</u></strong></p> <table align="left" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td colspan="2" style="width: 310px;"> <p>Properties index</p> </td> <td style="width: 57px;"> <p>Part A</p> </td> <td style="width: 136px;"> <p>Part B</p> </td> </tr> <tr> <td rowspan="2" style="width: 135px;"> <p>Before Curing</p> </td> <td style="width: 175px;"> <p>Appearence</p> </td> <td style="width: 57px;"> <p>Black fluid</p> </td> <td style="width: 136px;"> <p>Colorless / yellowish fluid</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Viscosisty (cps)</p> </td> <td style="width: 57px;"> <p>2500±500</p> </td> <td style="width: 136px;"> <p>-</p> </td> </tr> <tr> <td rowspan="5" style="width: 135px;"> <p>Features when operation</p> </td> <td style="width: 175px;"> <p>Mixing Ratio ( By weight)</p> </td> <td colspan="2" style="width: 193px;"> <p>10:1</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Operating Time (25C /min)</p> </td> <td colspan="2" style="width: 193px;"> <p>20~30</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Curing time ( hr, basically cured)</p> </td> <td colspan="2" style="width: 193px;"> <p>3</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Curing time ( hr, perfectly cured)</p> </td> <td colspan="2" style="width: 193px;"> <p>24</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Hardness(shore A)</p> </td> <td colspan="2" style="width: 193px;"> <p>15+/-3</p> </td> </tr> <tr> <td rowspan="5" style="width: 135px;"> <p> </p> <p>After Curing</p> </td> <td style="width: 175px;"> <p>Thermal Conductivity[W( m·K)]</p> </td> <td colspan="2" style="width: 193px;"> <p>≥0.4</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Dielectric Strength( kV/mm)</p> </td> <td colspan="2" style="width: 193px;"> <p>≥25</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Dielectric permittivity(1.2MHz)</p> </td> <td colspan="2" style="width: 193px;"> <p>3.0~3.3</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Volume resistivity(Ω·cm)</p> </td> <td colspan="2" style="width: 193px;"> <p>≥1.0×1016</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Fire Resistance</p> </td> <td colspan="2" style="width: 193px;"> <p>94-V1</p> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p>(Pls note all data of PCB Electronic Potting Silicone Rubber with black color above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).</p> <p> </p> <p><strong><u>Warm Tips for for PCB Electronic Potting Silicone</u></strong><br /> 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.<br /> 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.<br /> 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,<br /> it does not affect the performance.<br /> </p> <p><strong><u>Shelf Life and Transportation</u></strong><br /> 1. Twelve(12) months when stored at 25C in original unopened packages.<br /> 2. This is a non-dangerous product, it can be transported as general chemicals.<br /> 3. Products exceed the storage life should be confirmed normal before using.</p> <p> </p> <p><strong><u>Technical Guidelines</u></strong><br /> 1. Pls put part A and B in separate container and stir evenly before mixing the two<br /> parts together.<br /> 2. Mixing Ratio part A:part B is 10:1<br /> 3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.<br /> 4. HY-215# is cured at roon temperature, so pls put it under room temperature after<br /> pouring. It comes to next process when basically cured, and it takes about 24 hours<br /> for completely cured.</p> <p> </p> <p> </p> <p><strong><u>Further information for PCB Electronic Potting Silicone, please feel free to contact </u></strong><strong><u>Ms KAKA :</u></strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-63a31a
MOQ: 1 unitsLiquid Pad Printing Silicone Rubber Material
<p><strong>Specification </strong></p> <p>- Durable</p> <p>- Good effects for printing</p> <p>- Good quality without any impurity</p> <p>- Good resilience</p> <p>- Adjustable hardness</p> <p> </p> <p> </p> <p> </p> <p><strong>Liquid Pad Printing Silicone Rubber Material</strong></p> <p> </p> <p><strong>1. Applications of liquid pad printing silicone rubber</strong></p> <p>Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.</p> <p><strong>2. Features of liquid pad printing silicone rubber</strong></p> <p>a. resistance to deformation, high-temperature</p> <p>b. high printing times</p> <p>c. good aging resistance</p> <p>d. exceptional elasticity</p> <p>e. great printing effect</p> <p> </p> <p><strong>3. Operation Instructions of liquid pad printing silicone rubber </strong></p> <p>Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.</p> <p> </p> <p><strong> <br /> 4. Technical datasheet of liquid pad printing silicone rubber</strong></p> <table border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="width: 31px; height: 34px;"> <p>Model</p> </td> <td style="width: 47px; height: 34px;"> <p>Appearance</p> </td> <td style="width: 54px; height: 34px;"> <p>Viscosity (cs)</p> </td> <td style="width: 54px; height: 34px;"> <p>Hardness (A<sup>o</sup>)</p> </td> <td style="width: 82px; height: 34px;"> <p>Tensile Strength (kgf/c)</p> </td> <td style="width: 80px; height: 34px;"> <p>Tear Strength (kgf/cm)</p> </td> <td style="width: 55px; height: 34px;"> <p>Shrinkage (%)</p> </td> <td style="width: 57px; height: 34px;"> <p>Elongation (%)</p> </td> <td style="width: 58px; height: 34px;"> <p>Mixing Ratio(%)</p> </td> <td style="width: 68px; height: 34px;"> <p>Operating Time(H)</p> </td> <td style="width: 56px; height: 34px;"> <p>Curing Time(H)</p> </td> </tr> <tr> <td style="width: 31px; height: 35px;"> <p>HY- 918</p> </td> <td style="width: 47px; height: 35px;"> <p>White</p> </td> <td style="width: 54px; height: 35px;"> <p>18000~20000</p> </td> <td style="width: 54px; height: 35px;"> <p>22~24</p> </td> <td style="width: 82px; height: 35px;"> <p>≥32</p> </td> <td style="width: 80px; height: 35px;"> <p>≥20</p> </td> <td style="width: 55px; height: 35px;"> <p>≤0.3</p> </td> <td style="width: 57px; height: 35px;"> <p>≥500</p> </td> <td style="width: 58px; height: 35px;"> <p>2~3</p> </td> <td style="width: 68px; height: 35px;"> <p>0.5</p> </td> <td style="width: 56px; height: 35px;"> <p>2~4</p> </td> </tr> </tbody> </table> <p> </p> <table border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="width: 46px; height: 86px;"> <p>Model</p> </td> <td style="width: 34px; height: 86px;"> <p>Color</p> </td> <td style="width: 50px; height: 86px;"> <p>Mixing ratio (%)</p> </td> <td style="width: 38px; height: 86px;"> <p>Pot life (mins)</p> </td> <td style="width: 60px; height: 86px;"> <p>Demould time (hrs)</p> </td> <td style="width: 79px; height: 86px;"> <p>Hardness(A0)</p> </td> <td style="width: 99px; height: 86px;"> <p>Tensile-stength (N/m2)</p> </td> <td style="width: 82px; height: 86px;"> <p>Tear-strength (N/mm)</p> </td> <td style="width: 75px; height: 86px;"> <p>Viscosity (cps)</p> </td> <td style="width: 69px; height: 86px;"> <p>Elongation (%)</p> </td> </tr> <tr> <td style="width: 46px; height: 44px;"> <p>HY- 928</p> </td> <td style="width: 34px; height: 44px;"> <p>red</p> </td> <td style="width: 50px; height: 44px;"> <p>9:1</p> </td> <td style="width: 38px; height: 44px;"> <p>30</p> </td> <td style="width: 60px; height: 44px;"> <p>4±1</p> </td> <td style="width: 79px; height: 44px;"> <p>30</p> </td> <td style="width: 99px; height: 44px;"> <p>5.5</p> </td> <td style="width: 82px; height: 44px;"> <p>27</p> </td> <td style="width: 75px; height: 44px;"> <p>17000-20000</p> </td> <td style="width: 69px; height: 44px;"> <p>500</p> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p><strong>5. FAQ of liquid pad printing silicone rubber</strong></p> <p>Why the silicon pad is non-durable?</p> <p>This problem is caused not by the liquid silicon rubber itself, but in the process of filtering, the filtering handled not properly and impurities are not all filtered out; or in the process of packing as containers not cleaned thoroughly.</p> <p>As the silicon oil will break the molecular chain of the silicon rubber. More silicon oil added, softer the pad printing will be, meanwhile nondurable and easy ageing it will also turn to be.</p> <p>Some customers do not know well about the performance of silicon rubber. Actually, the durability of printing pad is closely related to the size of printing pattern. Some factories do not want to take the trouble to change the printing pad. While in fact, for large pattern, large silicone pads should be used, otherwise, use small one.(Generally, the ratio of the silicone pad to printing pattern is 3:1)</p> <p><a name="OLE_LINK4"></a><a name="OLE_LINK3"><strong>6. Other details of liquid pad printing silicone rubber</strong></a></p> <p>Place of Origin Guangdong China</p> <p>Brand Name Hong Ye Silicone Rubber</p> <p>Model Number HY901, HY902, HY912, HY916, pad printing silicone rubber</p> <p>Payment & Shipping Terms:</p> <p>Minimum Order Quantity: 100 Kilogram</p> <p>Price: FOB shenzhen USD 18/kg</p> <p>Packaging Details: 20kg/drum, 25kg/drum and 200kg/drum</p> <p>Delivery Time: within 3 days after payment confirmed in our bank</p> <p>Payment Terms: L/C at sight, T/T, Western Union</p> <p>Supply Ability: 8 Ton per Day</p> <p>Certifications:RoHS, MSDS, SGS, ISO9001:2000</p> <p> </p>
SKU: HM-2c2d3dHY-9055 of Electronic Potting Silicone Rubber
<p><strong>1. Product Feature of Electronic Potting Silicone Rubber</strong><br /> HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã€PPã€ABSã€PVC, etc. and metal materials.</p> <p> </p> <p><strong>2. Typical Application of Electronic Potting Silicone Rubber</strong></p> <p>HY-9055 electronic potting silicone rubber could be applied to</p> <p>- high powered electronics,</p> <p>- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.</p> <p>-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.<br /> </p> <p><strong>3. Technical Guidelines of of Electronic Potting Silicone Rubber </strong></p> <p>a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.</p> <p>b, Mixing Ratio: part A: part B = 1:1</p> <p>c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.</p> <p> </p> <p><strong>Note: </strong>The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.</p> <p><strong>4.Notes of Electronic Potting Silicone Rubber</strong><br /> a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.</p> <p>Organotin compound or Condensation silicone with organotin</p> <p>Sulphur, sulfide and sulfur rubber materials.</p> <p>Amine compounds as well as contains the amine materials.</p> <p>Pewters solder flux</p> <p>b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.</p> <p>c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.</p> <p>d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.</p> <p><strong>Technical Parameters of of Electronic Potting Silicone Rubber</strong></p> <table align="left" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td colspan="2" style="width: 319px; height: 38px;"> <p>Features</p> </td> <td style="width: 103px; height: 38px;"> <p>Part A</p> </td> <td style="width: 157px; height: 38px;"> <p>Part B</p> </td> </tr> <tr> <td rowspan="2" style="width: 70px;"> <p>Before Curing</p> </td> <td style="width: 248px;"> <p>Appearence</p> </td> <td style="width: 103px;"> <p>Gray Fluid</p> </td> <td style="width: 157px;"> <p>White Fluid</p> </td> </tr> <tr> <td style="width: 248px; height: 28px;"> <p>Viscosisty(25℃cps)</p> </td> <td style="width: 103px; height: 28px;"> <p>2500±500</p> </td> <td style="width: 157px; height: 28px;"> <p>2500±500</p> </td> </tr> <tr> <td rowspan="5" style="width: 70px; height: 24px;"> <p>Operation features</p> </td> <td style="width: 248px; height: 24px;"> <p>Mixing Ratio</p> </td> <td colspan="2" style="width: 260px; height: 24px;"> <p>1:1</p> </td> </tr> <tr> <td style="width: 248px; height: 27px;"> <p>Viscosisty(after mixing) (cps)</p> </td> <td colspan="2" style="width: 260px; height: 27px;"> <p>2000~3000</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Operating Time(25℃ hr)</p> </td> <td colspan="2" style="width: 260px;"> <p>120</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Curing time (min,25℃)</p> </td> <td colspan="2" style="width: 260px;"> <p>480</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Curing time(80℃ hr)</p> </td> <td colspan="2" style="width: 260px;"> <p>20</p> </td> </tr> <tr> <td rowspan="7" style="width: 70px; height: 22px;"> <p> </p> <p> </p> <p>After Curing</p> </td> <td style="width: 248px; height: 22px;"> <p>Hardness(Shore A)</p> </td> <td colspan="2" style="width: 260px; height: 22px;"> <p>55±5</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Thermal conductivity [W(m·K)]</p> </td> <td colspan="2" style="width: 260px;"> <p>≥0.8</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Dielectric Strength(KV/mm)</p> </td> <td colspan="2" style="width: 260px;"> <p>≥25</p> </td> </tr> <tr> <td style="width: 248px;"> <p><a href="app:ds:permittivity">Permittivity</a>(1.2MHz)</p> </td> <td colspan="2" style="width: 260px;"> <p>3.0~3.3</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Volume Resisivityï¼ˆΩ·cm)</p> </td> <td colspan="2" style="width: 260px;"> <p>≥1.0×1016</p> </td> </tr> <tr> <td style="width: 248px;"> <p>linear expansibility [m/(m·K)]</p> </td> <td colspan="2" style="width: 260px;"> <p>≤2.2×10-4</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Fire Resistance </p> </td> <td colspan="2" style="width: 260px;"> <p>94-V1</p> </td> </tr> </tbody> </table> <p>(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)<br /> </p> <p><strong>PACKAGE</strong><br /> 40Kg/pail as a set (Part A 20Kg + Part B 20Kg)</p> <p><a name="OLE_LINK6"></a><a name="OLE_LINK5"><strong>SHELF LIFE AND TRANSPORTATION</strong></a></p> <p>1. Twelve(12) months when stored at 24C in tightly closed original packages.</p> <p>2. This kind of product is non-dangerous product, which could be transported as general chemicals.</p> <p>3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.</p> <p> </p> <p>More information about transparent silicone rubber, pls contact <strong>Ms KAKA:</strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-0d2bdc
MOQ: 1 unitsTransparent silicone rubber
<p>Transparent silicone rubber Application</p> <p> </p> <p>Transparent silicone rubber is specialize for crystal silicone mold, imitation zircon silicone mold , crystal resin diamond silicone mold, crystal facets diamond silicone mold, and polyester/ polyurethane/ epoxy section diamond silicone mold, rhinestone jewelry silicone mold, amber silicone mold, crystal jewelry silicone mold, imitation agate silicone molo, jade mold, jewelry rings silicone mold , boutique crafts molding and casting.</p> <p> </p> <p><strong>Transparent silicone rubber </strong><strong>Description</strong></p> <p> </p> <p><strong><u>Transparent silicone rubber</u></strong> is the best choice for diamond molding, crystal molding, resin crystal rhinestone molding.</p> <p><strong><u>Transparent silicone rubber</u></strong>is suitable for flat dies and special three-dimensional mold plastic mold replication </p> <p><strong><u>Transparent silicone rubber</u></strong>is the best choice of mold making material for complex shape and high-precision products molding & casting.</p> <p><a name="OLE_LINK9"></a><a name="OLE_LINK8"></a><a name="OLE_LINK7"><strong>Transparent silicone rubber</strong></a> <strong>Characteristics </strong></p> <p>* Low shrinkage (less than 0.1% )</p> <p> </p> <p>* High tensile and tear strength with high copy times</p> <p> </p> <p>* Hing heat resistance which can up to 250 °C</p> <p> </p> <p>* Easy for operation (mixing ratio at 1:1 /10:1)</p> <p> </p> <p>* Very good flow and easy for pouring operation</p> <p> </p> <p>* Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat</p> <p> </p> <p> </p> <p><strong>Transparent silicone rubber </strong><strong>Technical Parameters</strong></p> <table align="center" border="1" cellpadding="0" cellspacing="0" style="width:454px"> <tbody> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;"><strong>Model</strong></p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"><strong> HY-MJ2135</strong></p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"><strong>HY-MJ2235</strong></p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Appearance</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> Transparent</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> High transparent</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Mix ratio</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">10:1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">10:1</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Viscosity (cps)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">70000</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">70000</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Pot life(hrs)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">>2-3h</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">>2-3 h</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Curing time(°C/min)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">100-120°C/30mins</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">100-120°C/30mins</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Density</p> <p style="margin-left: 4.8pt;">/ g·cm-3</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">1.1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">1.1</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Hardness(A0)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">35</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">35</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Enlongation(%)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> ≥280</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> ≥320</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;"> Tear strength (KN·m-1)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">≥15</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">≥18</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Tensile strength (Mpa)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> ≥4.8</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> ≥5.2</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Shrinkage (%)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">0.1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">0.1</p> </td> </tr> </tbody> </table> <div style="clear: both;"> </div> <p> </p> <p>(Note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)</p> <p><strong>More information about transparent silicone rubber, pls contact</strong><strong><u>Miss kaka</u></strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-db4566
MOQ: 1 unitsBlack Color PCB Electronic Potting Silicone HY-215
<p> </p> <p><strong><u>Technical Parameters for PCB Electronic Potting Silicone</u></strong></p> <table align="left" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td colspan="2" style="width: 310px;"> <p>Properties index</p> </td> <td style="width: 57px;"> <p>Part A</p> </td> <td style="width: 136px;"> <p>Part B</p> </td> </tr> <tr> <td rowspan="2" style="width: 135px;"> <p>Before Curing</p> </td> <td style="width: 175px;"> <p>Appearence</p> </td> <td style="width: 57px;"> <p>Black fluid</p> </td> <td style="width: 136px;"> <p>Colorless / yellowish fluid</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Viscosisty (cps)</p> </td> <td style="width: 57px;"> <p>2500±500</p> </td> <td style="width: 136px;"> <p>-</p> </td> </tr> <tr> <td rowspan="5" style="width: 135px;"> <p>Features when operation</p> </td> <td style="width: 175px;"> <p>Mixing Ratio ( By weight)</p> </td> <td colspan="2" style="width: 193px;"> <p>10:1</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Operating Time (25C /min)</p> </td> <td colspan="2" style="width: 193px;"> <p>20~30</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Curing time ( hr, basically cured)</p> </td> <td colspan="2" style="width: 193px;"> <p>3</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Curing time ( hr, perfectly cured)</p> </td> <td colspan="2" style="width: 193px;"> <p>24</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Hardness(shore A)</p> </td> <td colspan="2" style="width: 193px;"> <p>15+/-3</p> </td> </tr> <tr> <td rowspan="5" style="width: 135px;"> <p> </p> <p>After Curing</p> </td> <td style="width: 175px;"> <p>Thermal Conductivity[W( m·K)]</p> </td> <td colspan="2" style="width: 193px;"> <p>≥0.4</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Dielectric Strength( kV/mm)</p> </td> <td colspan="2" style="width: 193px;"> <p>≥25</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Dielectric permittivity(1.2MHz)</p> </td> <td colspan="2" style="width: 193px;"> <p>3.0~3.3</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Volume resistivity(Ω·cm)</p> </td> <td colspan="2" style="width: 193px;"> <p>≥1.0×1016</p> </td> </tr> <tr> <td style="width: 175px;"> <p>Fire Resistance</p> </td> <td colspan="2" style="width: 193px;"> <p>94-V1</p> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p>(Pls note all data of PCB Electronic Potting Silicone Rubber with black color above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).</p> <p> </p> <p><strong><u>Warm Tips for for PCB Electronic Potting Silicone</u></strong><br /> 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.<br /> 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.<br /> 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,<br /> it does not affect the performance.<br /> </p> <p><strong><u>Shelf Life and Transportation</u></strong><br /> 1. Twelve(12) months when stored at 25C in original unopened packages.<br /> 2. This is a non-dangerous product, it can be transported as general chemicals.<br /> 3. Products exceed the storage life should be confirmed normal before using.</p> <p> </p> <p><strong><u>Technical Guidelines</u></strong><br /> 1. Pls put part A and B in separate container and stir evenly before mixing the two<br /> parts together.<br /> 2. Mixing Ratio part A:part B is 10:1<br /> 3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.<br /> 4. HY-215# is cured at roon temperature, so pls put it under room temperature after<br /> pouring. It comes to next process when basically cured, and it takes about 24 hours<br /> for completely cured.</p> <p> </p> <p> </p> <p><strong><u>Further information for PCB Electronic Potting Silicone, please feel free to contact </u></strong><strong><u>Ms KAKA :</u></strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-1df6b8
MOQ: 1 unitsLiquid Pad Printing Silicone Rubber Material
<p><strong>Specification </strong></p> <p>- Durable</p> <p>- Good effects for printing</p> <p>- Good quality without any impurity</p> <p>- Good resilience</p> <p>- Adjustable hardness</p> <p> </p> <p> </p> <p> </p> <p><strong>Liquid Pad Printing Silicone Rubber Material</strong></p> <p> </p> <p><strong>1. Applications of liquid pad printing silicone rubber</strong></p> <p>Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.</p> <p><strong>2. Features of liquid pad printing silicone rubber</strong></p> <p>a. resistance to deformation, high-temperature</p> <p>b. high printing times</p> <p>c. good aging resistance</p> <p>d. exceptional elasticity</p> <p>e. great printing effect</p> <p> </p> <p><strong>3. Operation Instructions of liquid pad printing silicone rubber </strong></p> <p>Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.</p> <p> </p> <p><strong> <br /> 4. Technical datasheet of liquid pad printing silicone rubber</strong></p> <table border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="width: 31px; height: 34px;"> <p>Model</p> </td> <td style="width: 47px; height: 34px;"> <p>Appearance</p> </td> <td style="width: 54px; height: 34px;"> <p>Viscosity (cs)</p> </td> <td style="width: 54px; height: 34px;"> <p>Hardness (A<sup>o</sup>)</p> </td> <td style="width: 82px; height: 34px;"> <p>Tensile Strength (kgf/c)</p> </td> <td style="width: 80px; height: 34px;"> <p>Tear Strength (kgf/cm)</p> </td> <td style="width: 55px; height: 34px;"> <p>Shrinkage (%)</p> </td> <td style="width: 57px; height: 34px;"> <p>Elongation (%)</p> </td> <td style="width: 58px; height: 34px;"> <p>Mixing Ratio(%)</p> </td> <td style="width: 68px; height: 34px;"> <p>Operating Time(H)</p> </td> <td style="width: 56px; height: 34px;"> <p>Curing Time(H)</p> </td> </tr> <tr> <td style="width: 31px; height: 35px;"> <p>HY- 918</p> </td> <td style="width: 47px; height: 35px;"> <p>White</p> </td> <td style="width: 54px; height: 35px;"> <p>18000~20000</p> </td> <td style="width: 54px; height: 35px;"> <p>22~24</p> </td> <td style="width: 82px; height: 35px;"> <p>≥32</p> </td> <td style="width: 80px; height: 35px;"> <p>≥20</p> </td> <td style="width: 55px; height: 35px;"> <p>≤0.3</p> </td> <td style="width: 57px; height: 35px;"> <p>≥500</p> </td> <td style="width: 58px; height: 35px;"> <p>2~3</p> </td> <td style="width: 68px; height: 35px;"> <p>0.5</p> </td> <td style="width: 56px; height: 35px;"> <p>2~4</p> </td> </tr> </tbody> </table> <p> </p> <table border="0" cellpadding="0" cellspacing="0"> <tbody> <tr> <td style="width: 46px; height: 86px;"> <p>Model</p> </td> <td style="width: 34px; height: 86px;"> <p>Color</p> </td> <td style="width: 50px; height: 86px;"> <p>Mixing ratio (%)</p> </td> <td style="width: 38px; height: 86px;"> <p>Pot life (mins)</p> </td> <td style="width: 60px; height: 86px;"> <p>Demould time (hrs)</p> </td> <td style="width: 79px; height: 86px;"> <p>Hardness(A0)</p> </td> <td style="width: 99px; height: 86px;"> <p>Tensile-stength (N/m2)</p> </td> <td style="width: 82px; height: 86px;"> <p>Tear-strength (N/mm)</p> </td> <td style="width: 75px; height: 86px;"> <p>Viscosity (cps)</p> </td> <td style="width: 69px; height: 86px;"> <p>Elongation (%)</p> </td> </tr> <tr> <td style="width: 46px; height: 44px;"> <p>HY- 928</p> </td> <td style="width: 34px; height: 44px;"> <p>red</p> </td> <td style="width: 50px; height: 44px;"> <p>9:1</p> </td> <td style="width: 38px; height: 44px;"> <p>30</p> </td> <td style="width: 60px; height: 44px;"> <p>4±1</p> </td> <td style="width: 79px; height: 44px;"> <p>30</p> </td> <td style="width: 99px; height: 44px;"> <p>5.5</p> </td> <td style="width: 82px; height: 44px;"> <p>27</p> </td> <td style="width: 75px; height: 44px;"> <p>17000-20000</p> </td> <td style="width: 69px; height: 44px;"> <p>500</p> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p><strong>5. FAQ of liquid pad printing silicone rubber</strong></p> <p>Why the silicon pad is non-durable?</p> <p>This problem is caused not by the liquid silicon rubber itself, but in the process of filtering, the filtering handled not properly and impurities are not all filtered out; or in the process of packing as containers not cleaned thoroughly.</p> <p>As the silicon oil will break the molecular chain of the silicon rubber. More silicon oil added, softer the pad printing will be, meanwhile nondurable and easy ageing it will also turn to be.</p> <p>Some customers do not know well about the performance of silicon rubber. Actually, the durability of printing pad is closely related to the size of printing pattern. Some factories do not want to take the trouble to change the printing pad. While in fact, for large pattern, large silicone pads should be used, otherwise, use small one.(Generally, the ratio of the silicone pad to printing pattern is 3:1)</p> <p><a name="OLE_LINK4"></a><a name="OLE_LINK3"><strong>6. Other details of liquid pad printing silicone rubber</strong></a></p> <p>Place of Origin Guangdong China</p> <p>Brand Name Hong Ye Silicone Rubber</p> <p>Model Number HY901, HY902, HY912, HY916, pad printing silicone rubber</p> <p>Payment & Shipping Terms:</p> <p>Minimum Order Quantity: 100 Kilogram</p> <p>Price: FOB shenzhen USD 18/kg</p> <p>Packaging Details: 20kg/drum, 25kg/drum and 200kg/drum</p> <p>Delivery Time: within 3 days after payment confirmed in our bank</p> <p>Payment Terms: L/C at sight, T/T, Western Union</p> <p>Supply Ability: 8 Ton per Day</p> <p>Certifications:RoHS, MSDS, SGS, ISO9001:2000</p> <p> </p>
SKU: HM-59945bHY-9055 of Electronic Potting Silicone Rubber
<p><strong>1. Product Feature of Electronic Potting Silicone Rubber</strong><br /> HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã€PPã€ABSã€PVC, etc. and metal materials.</p> <p> </p> <p><strong>2. Typical Application of Electronic Potting Silicone Rubber</strong></p> <p>HY-9055 electronic potting silicone rubber could be applied to</p> <p>- high powered electronics,</p> <p>- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.</p> <p>-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.<br /> </p> <p><strong>3. Technical Guidelines of of Electronic Potting Silicone Rubber </strong></p> <p>a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.</p> <p>b, Mixing Ratio: part A: part B = 1:1</p> <p>c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.</p> <p> </p> <p><strong>Note: </strong>The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.</p> <p><strong>4.Notes of Electronic Potting Silicone Rubber</strong><br /> a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.</p> <p>Organotin compound or Condensation silicone with organotin</p> <p>Sulphur, sulfide and sulfur rubber materials.</p> <p>Amine compounds as well as contains the amine materials.</p> <p>Pewters solder flux</p> <p>b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.</p> <p>c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.</p> <p>d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.</p> <p><strong>Technical Parameters of of Electronic Potting Silicone Rubber</strong></p> <table align="left" border="1" cellpadding="0" cellspacing="0"> <tbody> <tr> <td colspan="2" style="width: 319px; height: 38px;"> <p>Features</p> </td> <td style="width: 103px; height: 38px;"> <p>Part A</p> </td> <td style="width: 157px; height: 38px;"> <p>Part B</p> </td> </tr> <tr> <td rowspan="2" style="width: 70px;"> <p>Before Curing</p> </td> <td style="width: 248px;"> <p>Appearence</p> </td> <td style="width: 103px;"> <p>Gray Fluid</p> </td> <td style="width: 157px;"> <p>White Fluid</p> </td> </tr> <tr> <td style="width: 248px; height: 28px;"> <p>Viscosisty(25℃cps)</p> </td> <td style="width: 103px; height: 28px;"> <p>2500±500</p> </td> <td style="width: 157px; height: 28px;"> <p>2500±500</p> </td> </tr> <tr> <td rowspan="5" style="width: 70px; height: 24px;"> <p>Operation features</p> </td> <td style="width: 248px; height: 24px;"> <p>Mixing Ratio</p> </td> <td colspan="2" style="width: 260px; height: 24px;"> <p>1:1</p> </td> </tr> <tr> <td style="width: 248px; height: 27px;"> <p>Viscosisty(after mixing) (cps)</p> </td> <td colspan="2" style="width: 260px; height: 27px;"> <p>2000~3000</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Operating Time(25℃ hr)</p> </td> <td colspan="2" style="width: 260px;"> <p>120</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Curing time (min,25℃)</p> </td> <td colspan="2" style="width: 260px;"> <p>480</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Curing time(80℃ hr)</p> </td> <td colspan="2" style="width: 260px;"> <p>20</p> </td> </tr> <tr> <td rowspan="7" style="width: 70px; height: 22px;"> <p> </p> <p> </p> <p>After Curing</p> </td> <td style="width: 248px; height: 22px;"> <p>Hardness(Shore A)</p> </td> <td colspan="2" style="width: 260px; height: 22px;"> <p>55±5</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Thermal conductivity [W(m·K)]</p> </td> <td colspan="2" style="width: 260px;"> <p>≥0.8</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Dielectric Strength(KV/mm)</p> </td> <td colspan="2" style="width: 260px;"> <p>≥25</p> </td> </tr> <tr> <td style="width: 248px;"> <p><a href="app:ds:permittivity">Permittivity</a>(1.2MHz)</p> </td> <td colspan="2" style="width: 260px;"> <p>3.0~3.3</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Volume Resisivityï¼ˆΩ·cm)</p> </td> <td colspan="2" style="width: 260px;"> <p>≥1.0×1016</p> </td> </tr> <tr> <td style="width: 248px;"> <p>linear expansibility [m/(m·K)]</p> </td> <td colspan="2" style="width: 260px;"> <p>≤2.2×10-4</p> </td> </tr> <tr> <td style="width: 248px;"> <p>Fire Resistance </p> </td> <td colspan="2" style="width: 260px;"> <p>94-V1</p> </td> </tr> </tbody> </table> <p>(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)<br /> </p> <p><strong>PACKAGE</strong><br /> 40Kg/pail as a set (Part A 20Kg + Part B 20Kg)</p> <p><a name="OLE_LINK6"></a><a name="OLE_LINK5"><strong>SHELF LIFE AND TRANSPORTATION</strong></a></p> <p>1. Twelve(12) months when stored at 24C in tightly closed original packages.</p> <p>2. This kind of product is non-dangerous product, which could be transported as general chemicals.</p> <p>3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.</p> <p> </p> <p>More information about transparent silicone rubber, pls contact <strong>Ms KAKA:</strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-0d87bb
MOQ: 1 unitsTransparent Silicone Rubber for Resin Diamond Molding
<p><strong>Transparent Silicone Rubber for Resin Diamond Molding </strong><strong>Description</strong></p> <p> </p> <p>Transparent Silicone Rubber for Resin Diamond Molding for all kinds of jewelry, crystal deocarations molding . It’s generally named two-components silicone rubber which will be cured by heated temperature, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1.</p> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Application</strong></p> <p> </p> <p><u>Transparent Silicone Rubber for Resin Diamond Molding is rapid prototyping for imitational crystal diamond, resin diamond decorations, also suitable for molding epoxy resin, polyester resin, polystyrene, vinyl, paraffin wax, low melting point alloy, concrete and so on, also used in cultural relics, copy and art crafts.</u></p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Technical Parameters </strong></p> <table align="center" border="1" cellpadding="0" cellspacing="0" style="width:514px"> <tbody> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Model</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> HY-MJ2135</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">HY-MJ2235</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Appearance</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> translucent</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> transparent</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Mixing ratio</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">1:1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">1:1</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Viscosity (CPS)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">70000</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">70000</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Pot life(25°C)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">>2-3h</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">>2-3 h</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Curing time(°C/mins)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">100-120°C/30mins</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">100-120°C/30mins</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Density (g·cm-30</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">1.1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">1.1</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Hardness(A°)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">35</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">35</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Enlongation-break (%)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> ≥280</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> ≥320</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;"> Tear-strength (KN·m-1)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">≥15</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">≥18</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Tensile-strength (Mpa)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;"> ≥4.8</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;"> ≥5.2</p> </td> </tr> <tr> <td style="width: 172px;"> <p style="margin-left: 5.45pt;">Retractility (%)</p> </td> <td style="width: 192px;"> <p style="margin-left: 5.45pt;">0.1</p> </td> <td style="width: 150px;"> <p style="margin-left: 5.45pt;">0.1</p> </td> </tr> </tbody> </table> <div style="clear: both;"> </div> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Characteristics </strong></p> <p> </p> <p>*Body safe, skin safe, medical grade, nontoxic.</p> <p> </p> <p>*High tensile and tear strength</p> <p> </p> <p>*High temperature resistance, can resist more then 250°C</p> <p> </p> <p>*Easy for operation (mixing ratio at 1:1 /10:1)</p> <p> </p> <p>*Easy demoulding</p> <p> </p> <p>*Good dimensional stability</p> <p> </p> <p>*Rapid prototyping</p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Package</strong><br /> <strong>40</strong>Kgs/pail as a set (Part A 20Kg + Part B 20Kg)</p> <p> </p> <p> </p> <p> </p> <p><strong>Transparent Silicone Rubber for Resin Diamond Molding</strong><strong>Shelf life and Transportation</strong></p> <p> </p> <p>1. Twelve(12) months when stored at 25C in tightly closed original packages.</p> <p> </p> <p>2. This kind of product is non-dangerous product, which could be transported as general chemicals.</p> <p> <a name="_GoBack"></a></p> <p> </p> <p> </p> <p><strong>More details of Transparent Silicone Rubber for Resin Diamond Molding, pls feel free to contact </strong><strong><u>Ms kaka</u></strong><strong>:</strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-082643
MOQ: 1 unitsTransparent silicone rubber
<p>Transparent silicone rubber Application</p> <p> </p> <p>Transparent silicone rubber is specialize for crystal silicone mold, imitation zircon silicone mold , crystal resin diamond silicone mold, crystal facets diamond silicone mold, and polyester/ polyurethane/ epoxy section diamond silicone mold, rhinestone jewelry silicone mold, amber silicone mold, crystal jewelry silicone mold, imitation agate silicone molo, jade mold, jewelry rings silicone mold , boutique crafts molding and casting.</p> <p> </p> <p><strong>Transparent silicone rubber </strong><strong>Description</strong></p> <p> </p> <p><strong><u>Transparent silicone rubber</u></strong> is the best choice for diamond molding, crystal molding, resin crystal rhinestone molding.</p> <p><strong><u>Transparent silicone rubber</u></strong>is suitable for flat dies and special three-dimensional mold plastic mold replication </p> <p><strong><u>Transparent silicone rubber</u></strong>is the best choice of mold making material for complex shape and high-precision products molding & casting.</p> <p><a name="OLE_LINK9"></a><a name="OLE_LINK8"></a><a name="OLE_LINK7"><strong>Transparent silicone rubber</strong></a> <strong>Characteristics </strong></p> <p>* Low shrinkage (less than 0.1% )</p> <p> </p> <p>* High tensile and tear strength with high copy times</p> <p> </p> <p>* Hing heat resistance which can up to 250 °C</p> <p> </p> <p>* Easy for operation (mixing ratio at 1:1 /10:1)</p> <p> </p> <p>* Very good flow and easy for pouring operation</p> <p> </p> <p>* Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat</p> <p> </p> <p> </p> <p><strong>Transparent silicone rubber </strong><strong>Technical Parameters</strong></p> <table align="center" border="1" cellpadding="0" cellspacing="0" style="width:454px"> <tbody> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;"><strong>Model</strong></p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"><strong> HY-MJ2135</strong></p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"><strong>HY-MJ2235</strong></p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Appearance</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> Transparent</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> High transparent</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Mix ratio</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">10:1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">10:1</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Viscosity (cps)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">70000</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">70000</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Pot life(hrs)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">>2-3h</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">>2-3 h</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Curing time(°C/min)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">100-120°C/30mins</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">100-120°C/30mins</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Density</p> <p style="margin-left: 4.8pt;">/ g·cm-3</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">1.1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">1.1</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Hardness(A0)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">35</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">35</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Enlongation(%)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> ≥280</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> ≥320</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;"> Tear strength (KN·m-1)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">≥15</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">≥18</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Tensile strength (Mpa)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;"> ≥4.8</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;"> ≥5.2</p> </td> </tr> <tr> <td style="width: 158px;"> <p style="margin-left: 4.8pt;">Shrinkage (%)</p> </td> <td style="width: 164px;"> <p style="margin-left: 4.8pt;">0.1</p> </td> <td style="width: 132px;"> <p style="margin-left: 4.8pt;">0.1</p> </td> </tr> </tbody> </table> <div style="clear: both;"> </div> <p> </p> <p>(Note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)</p> <p><strong>More information about transparent silicone rubber, pls contact</strong><strong><u>Miss kaka</u></strong></p> <p><strong>Tel: +86-0755-89212365</strong></p> <p><strong>Mob: +86-18938867528</strong></p>
SKU: HM-2042af
