
Ex2000
📍Manufactured in Durgapur , West Bengal, India
<p>Ex2000 is perfectly suited for fan and pump applications. It can handle loads up to 450 kW, and is engineered to keep your machine operating at optimum efficiency – even in the hot, humid and dusty conditions that characterize India's industrial environment. It has features that save energy and cost, and is easy to operate.</p> <p><strong>Range</strong></p> <ul> <li>Three Phase 415V - 5.5 to 450kW</li> </ul> <p><strong>Enclosure</strong></p> <ul> <li>IP20 till 11Kw & IP00 till 450Kw</li> </ul> <p><strong>Features</strong></p> <ul> <li>V/F, Sensorless Vector Control, Slip Compensation</li> <li>Starting Torque: 200% at 0.5Hz for Sensorless Control</li> <li>Conformal Coating complying to IEC 60721-3-3 class 3C2</li> <li>Built-in RS485 Modbus</li> <li>Built-in Booster pump control</li> <li>Dual PID</li> <li>Pre-heat Function</li> <li>Reverse Rotation Prevention</li> <li>Component Life Monitoring</li> <li>Built-in DC Reactor from 22kW to 280kW</li> </ul> <p><strong>Dual rating operation</strong></p> <ul> <li>Designed to be used for heavy and normal duty applications.<br /> <br /> <strong>Overload capacity</strong> <ul> <li>Heavy duty operation: <strong>150% </strong>of rated current for 60 sec</li> <li>Normal duty operation: <strong>110% </strong>of rated current for 60 sec</li> </ul> </li> </ul> <p><strong>Booster Pump</strong></p> <ul> <li>It is used when a single drive is used to control multiple motors in pump systems, by default 4 Pumps can be controlled & Max upto 8 pumps can be controlled</li> <li>Precise Control of pressure</li> <li>Ideal cost effective solution for constant pressure / constant flow pumping application</li> </ul> <p><strong>PID & Dual PID</strong></p> <ul> <li>In the centrifugal fan and pump, PID control is provided as a standard function in order to maintain a constant pressure, flow or level</li> <li>Where external or cascaded PID control is required, the built-in dual PID algorithm of the Ex2000 can be utilised to satisfy various system requirements</li> </ul> <p><strong>Sleep & Wake Function</strong></p> <ul> <li>It automatically switches OFF Drive during user-programmed low- load conditions and then to start-up again when process demand increases</li> <li>It helps eliminate unnecessary operation at idle speeds, thus saving wear and tear, as well as energy</li> <li>PID Control</li> </ul> <p><strong>Automatic Energy Saving</strong></p> <ul> <li>Load change may incur energy losses. But the optimised flux control of the Ex2000 results in more outstanding energy-saving</li> </ul> <p><strong>Pre Heat Function</strong></p> <ul> <li>It allows the drive to maintain residual heat in the motor, which helps eliminate condensation in damp conditions when the motor is not in use.</li> <li>In the drive, an adjustable, low-level DC current is applied to the stator windings either continuously or on a duty cycle basis</li> </ul> <p><strong>KEB</strong></p> <ul> <li>During power dips or momentary power outage, the drive’s output can be maintained by utilising the residual mechanical energy in the load as a regenerative source.</li> <li>The duration of the power-dip ride-through depends on the load characteristics</li> </ul> <p><strong>Removable Terminal Block</strong></p> <ul> <li>In case of AC Drive failure, control card of the existing drive can be replaced to new drive with wiring</li> <li>Reduces the downtime of AC Drive replacement</li> </ul>
