
Centurys Everon Pen
📍Manufactured in Mumbai, Maharashtra, India
<p> </p> <p style="text-align:justify">Century's Everon Pen is a fine point fabric marker used in the textile industry and laboratories for fabric shrinkage testing. It has a hard aluminum body filled with ink and a rubber valve on the bottom, when pumped slightly pushes the ink towards a fine ball point for sharp, fine marks. It is widely used in laboratories and textile mills to verify the dimensional stability (shrinkage) of fabrics with a grooved template after washing and processing into fabrics. It is similar to dalo texpen in many parts of the world. It comes with two types of tips: plastic (1.5mm) and stainless steel (1.2mm).</p> <p style="text-align:justify"><strong>Ink content: </strong> 30 ml</p> <p style="text-align:justify"><strong>Available colors: </strong> Yellow, red, black, blue, orange, green, white, pink * and purple * (* - make orders)</p> <p style="text-align:justify"><strong>Advantage:</strong></p> <ul> <li style="text-align:justify">Hard aluminum body to prevent breakage, leakage and puncture.</li> <li style="text-align:justify">Orient to use and smooth the flow of ink due to the rubber valve at the bottom.</li> <li style="text-align:justify">Fine-tip allows marker to fit within slotted templates for fabric shrinkage testing.</li> <li style="text-align:justify">Marks remain permanent even after staining, bleaching, washing, and other finishing processes.</li> <li style="text-align:justify">Works on all synthetics, cotton, denim, wool, polyester, linen, knit, etc.</li> </ul> <p style="text-align:justify"><strong>Address of Use:</strong></p> <ul> <li style="text-align:justify">Remove the cap. For cold start, press the rubber ball / valve 4-5 times at the bottom for ink flow at the tip.</li> <li style="text-align:justify">Mark vertically at a 90 degree angle and make sure the ball presses against the surface for a smooth flow of ink.</li> <li style="text-align:justify">As the pressure reduces, press the rubber valve 2-3 times to continue writing.</li> <li style="text-align:justify">Do not press the rubber bulb when not in use as it will increase the ink pressure.</li> <li style="text-align:justify">Clean the tip and replace the cap when after each use.</li> </ul> <p style="text-align:justify"><strong>Caution:</strong></p> <ul> <li style="text-align:justify">Harmful if swallowed or intentionally inhaled.</li> <li style="text-align:justify">Avoid eye contact.</li> <li style="text-align:justify">Keep away from open flame.</li> <li style="text-align:justify">Test before use</li> </ul> <p style="text-align:justify"> </p>
