.jpg)
Thermal Barrier Coatings (Case Study)
📍Manufactured in Ahmedabad, Gujarat, India
<p><strong>Thermal Barrier Coatings (Case Study)</strong></p> <ul> <li>The barrier coat reduces the direct effect of temperature by reducing heat transfer caused by conduction, convection & radiation. Thus the base material retains properties which it could have lost at high temperature exposure.</li> <li>The final coating material is normally a ceramic oxide. Industry uses are mostly limited to Stabilized zirconia( Zirconia changes phase at around 1000 deg C) or Alumina.</li> <li>All ceramic oxides are oxygen transparent hence a oxidation resistant bond coat is provided.</li> <li>Coatings can peel off at high temperature due to variation in co-efficient in thermal expansion. Hence depending on base material a graded CTE matched material is applied.</li> </ul> <p><strong>We have carried out repairs on Roof jackets of copper blast furnace. The jackets had following properties</strong></p> <ul> <li>MOC copper.</li> <li>Wear due to high temperature corrosion by SO4 gases and splashing of molten copper on roof jackets at 1240 deg C. observed wear was around 15-20mm reduction in thickness of copper jacket.</li> <li>The jackets are water cooled.</li> </ul> <p>Solution: Multi layer coatings of bond coat + top coat + sealant are applied. We carried out the job by ARC spray Aluminium bronze + MCRAlY alloy + Rod sprayed Alumina + Sealant suitable up to 1600 dg C. </p>
