VANDAN ALLOYS is an exporter and manufacturer of Inconel Bolts, which is being increasingly used in the boilers of waste incinerators. We also offer these alloys in different grades such as Inconel 600 Bolts, Inconel 601 Bolts, Inconel 625 Bolts, Inconel 718 Bolts, and so on. Major hot working in our Inconel Hex Bolts should be done between 2300 Degree / 1850 Degree F, while light working may perhaps be continued as low as 1600 Degree F. Low sulfur reducing furnace atmospheres for these Inconel Hex Head Bolts should be used in forging, where no hot working should be attempted between 1600 Degree / 1200 Degree F due to lower ductility in that range.