Century Fine-tip Metal Marker is a permanent marker for making bright, opaque and dimmed marks on any surface. The unique stainless steel fine point makes it very easy to mark smaller objects and places that are difficult to mark with large, regular tip markers. The marker has a hard aluminum body filled with ink and a rubber valve on the bottom, when pumped slightly pushes the ink towards a fine ball point to obtain sharp marks. Marks made by the marker will not peel / peel / fade or rub off, and can withstand heat and weather in harsh conditions. It has a special viscous ink formulation similar to paint that remains permanent on steel, alloys, metals, concrete, glass, rubber, wood and even plastics. You can mark wet, dry, dusty, oily, greasy, and even extremely rough surfaces with ease.
Available colors: Yellow, white, black, blue, red, green, orange-violet *.
Size: 1.2mm Tip
Advantage:
- Viscous ink makes permanent, bright & amp; Opaque marks on all surfaces, including metals, steel, glass, rubber, wood, concrete, etc.
- The hard aluminum body makes it difficult to break, puncture or leak compared to other tube markers.
- The ergonomic size makes it a breeze to slip into a pocket and use anywhere like a pen.
- The rubber valve on the bottom makes it very easy to use with a continuous flow of ink.
- Zero Wastage compared to Tube type markers.
- Ball-tipped stainless steel tip allows for easy, smooth marks on wet, oily, dry, greasy, and extremely rough surfaces.
- 30 ml ink content (5-6 times more than conventional fine-tip paint markers)
- Ideal for use in welding, metal cutting, automation industry, spare parts, shipbuilding, construction, dies and molds, scrap metal, oil and gas industry, cement sheet precast, etc.
Address of Use:
- Remove the cap. For cold start, press the rubber ball / valve 4-5 times at the bottom for ink flow at the tip.
- Mark vertically at a 90 degree angle & amp; Make sure the ball presses against the surface for a smooth flow of ink.
- As the pressure reduces, press the rubber valve 2-3 times to continue writing.
- Do not press the rubber bulb when not in use as it will increase the ink pressure.
- Clean the tip & amp; Replace the cap when after each use.
Caution:
- Harmful if swallowed or intentionally inhaled.
- Avoid eye contact. Keep away from open flame.
- Please test before using.
