Stainless Steel Lock Nuts are very useful to both engineers as well as mechanics. When one looks closely at the 316 stainless steel nylon insert lock nut he/ she is able to see a nylon sleeve or what is referred to as an insert.

Check Stainless Steel Lock Nuts Dimensions, M5 Stainless Steel Lock Nuts Metric, Stainless Steel Nylon Lock Nuts Manufacturers In India

Buy M6 Stainless Steel Lock Nuts, Stainless Steel Bearing Lock Nuts, Cone Lock Nuts And Self Locking Nuts From Largest Suppliers

Once the 1/4 stainless steel nylon lock nut has been tightened, the threads present on the shaft or the axle will cut into the nylon. These threads piercing into the Stainless Steel Nylon Lock Nuts is what holds it firmly in place. In fact, this is precisely what is required to prevent loosening of the Stainless Steel Metric Lock Nuts, due to the occurrence of friction and vibration when the wheel rotates.
 
Cone 18-8 stainless steel lock nuts are produced with a cone shaped top, which could be distorted after tapping in order to create a prevailing torque. The Stainless Steel Cone Lock Nuts are Less reusable in comparison to nylon insert. However, this type of lock nuts tends to be less susceptible to high temperature applications. Stainless Steel Flange Lock Nuts are hex shaped nuts with a circular shaped bottom flange which is larger than the hex section at the top.

Similar to flange lock nuts, Stainless Steel Stover Lock Nuts are a single piece fastener produced with a conical top with all-metal prevailing torque and a flat bottom bearing surface with chamfered corners.  The locking action, created by distortion of the top threads of the stover 1/4-20 stainless steel lock nuts, has the ability to withstand not only severe vibration but also shock loads.