Model: PPR-30(Piling)
TRACTOR MOUNTED PILING RIG FOR 1200MM DIA :
Technical Specifications:
Rotary Drilling | |
---|---|
Hole Diameter | 28” / 711mm |
Depth | 100 Feet / 30meters |
Drill Rod Length | 4 ½” x 10 feet (3.0 meter) |
Tractor: | New Holland Make |
Model | 7500 (4 Wheel Drive) |
Capacity | 75hp @ 2300 RPM. |
Prime Mover: | Tractor Engine using PTO Gear box |
Application: | Unconsolidated / Alluvial / Soft Soil |
Mast: | Sturdy structural channel mast structure electrically welded. |
Mast Overall Length | 5,500mm |
Rotary Head Travel | 3,500mm |
Feed System: | Feed & Hoist using pulley, wire rope and hydraulic cylinder. |
Feed Cylinder Size | Ø100 mm |
Stroke | 1750 mm |
Max. Pull up force | 7,000kg-f |
Max. Pull down force | 4,500kg-f |
Reeving Ratio | 1:2 |
Maximum Pull up speed | 30m/min |
Rotary Head | |
Spindle Speed | 0 – 50rpm |
Torque | 420 kg – m |
Hydraulic System: | |
Maximum Working Pressure | 180 kg/cm2 |
Capacity | 350 Liters |
Mud Pump | |
Flow rate | 1500 LPM |
Pressure | 10kg/cm2 |
Centrifugal Type Hydraulic Driven Mud Pump Required for Rotary Drilling Application | |
Levelling Stabilizers | |
Cylinder Size | Ø100 mm |
Stroke | 610 mm |
Foot mounted type hydraulic levelling jacks The above jacks are provided with “reverse flow restricted valves” to ensure safe operation. |
|
Mast Rising Cylinder | |
Cylinder Size | Ø100 mm |
Stroke | 700 mm |
The system is a provided with a Hydraulic cylinder for Raising and lowering of the Mast Assembly. | |
Breakout Wrench | |
Cylinder Bore | Ø70mm |
Stroke | 200mm |
The drill rig is equipped with hydraulic break out wrench for making and breaking of drill rods. |