Products Details

PDTHR-600 Truck mounted DTH cum Rotary Drilling Rigs

Model: PDTHR-600

Description

Technical Specifications:

Prime Mover: Truck
Make	Ashok Leyland
Drive	6 x 4
Gross Vehicle weight	25 MT
Engine Rating	230 HP @ 2400 rpm
Prime Mover: Support Truck
Make	Ashok Leyland
Drive	6 x 2
Gross Vehicle weight	16 MT
Engine Rating	160 HP @ 1800 rpm
Air Compressor
Make	ELGI / Atlas Copco
CFM	1200
PSI	350 (22 Bar)
Drill Depth
Maximum Depth	600Meters(2000Feet)
Rod Handling	6.0 inch(20 Feet)
Hole Diameter
DTH	165 – 355mm(6 1/2″- 14″)
Rotary	165 – 355mm(6”-14”)
Mud Pump
Make	G&P/ Lakshmi
Stroke	150mm
Liner Size	150mm
Mast
Max Capacity	30 tons ( 67200 lbs )
Height	9 mtr (29.7 ft)
Rod handling capacity	6.0 mtr (20 ft)
Main Hoist Assembly
Line Pull ( Bare Drum)	3000 Kgf
Max Line Speed	40 M/Minute
Wire Dia	16 mm
Drive	Hydraulic
Feed System
Pull Up	11,500 Kgf
Pull Down	6,000 Kgf
Hoisting Speed	35 Mtr/Minute
Water Injection Pump
Max Flow	56 LPM
Max Pressure	30 kg/cm2
Auxillary Winch
Bare Drum Pull	1000 Kgf
Max Speed	20 M/Minute
Hydraulic Circuit
Max Operating Pressure	220 kg/cm2
Hydraulic Tank Capacity	600 Litres
Filtration Non –Returnline	10/25 Microns
Rotary Head
Torque	600 Kg-M
Rotation Speed	1 -100 Rpm
Cylinders
Stabilizing Cylinders 4 Nos	125 mm(Bore), 610 mm(Stroke)
Mast Raising Cylinder	100 mm(Bore), 800 mm(Stroke)
Feed Cylinder	140 mm(Bore), 2350 mm(Stroke)
Break out Wrench	80 mm(Bore), 300 mm(Stroke)
RH Slide Out Cyliner	80 mm(Bore), 450 mm(Stroke)
Feed System
Pull Up	18,635 Kgf
Pull Down	12,635 Kgf
Hoisting Speed	75 Mtr/Minute

M/S Prime Rigs Limited - All Rights Reserved