Products Details

PCDR-100 trolley Mounted Core Drilling rig

Model: PCDR-100 (TROLLEY)

Core Barrel Diameter : BQ/NQ/PQ series

Technical Specifications:

Diamond Core Drilling
Core Barrel Diameter	BQ/NQ/PQ series
Depth	330 feet / 100 meters
Core Diameter	55.6mm
Drill Hole Diameter	73.0mm
Angle of Drilling	45° – 90°
Trolley
Two Wheel Dummy	Trolley of 6 Ton Capacity.
Tyre	9.00 X 16 PR
Prime Mover	A separate Diesel Driven Deck Engine.
Engine capacity	50 hp @ 1500 RPM
Application	Alluvial to Hard Soil Formation for Mineral Extraction, Soil Sampling, and Geo – Mineral resources survey etc.
Mast	Sturdy structural channel mast structure electrically welded.
	Mast Overall Length – 5,200mm
	Rotary Head Travel – 3,500mm
Feed System	Feed & Hoist using pulley, wire rope and hydraulic cylinder.
Feed Cylinder Size	Ø100 mm
Stroke	1750 mm
Max. Pull up force	7,200kg-f
Max. Pull down force	3,600kg-f
Reeving Ratio	1:2
Maximum Pull up speed	30m/min
Rotary Head	Dual Speed Rotary Head Gear Box with variable Speed

Hydraulic System
Maximum Working Pressure	210 kg/cm2
Capacity	300 Liters
Triplex Water
Max. Flow Rate	120 LPM
Injection Pump
Max. Pressure	40kg/cm2
Hydraulically Driven Triplex Water Injection pumps for injecting Water / Foam with necessary piping and flow control valves.
Mast Rising Cylinder
Cylinder Size	Ø100 mm
Max. Pressure	40kg/cm2
	The System is provided with a mast rising Cylinder for raising & Lowering of the Mast.
Mast Rising Cylinder
Cylinder Size	Ø100 mm
Stroke	700 mm
	The System is provided with a mast rising Cylinder for raising &Lowering of the Mast.
Levelling Stabilizers
Cylinder Size	Ø100 mm
Stroke	610 mm
	Foot mounted type hydraulic levelling jacks
	The above jacks are provided with “reverse flow restricted valves” to ensure safe operation.
Dump Cylinder
Cylinder Bore	Ø100 mm
Stroke	1250 mm
	The drill rig is equipped with dumping cylinder for tilting of the Mast for angular drilling.
Wire Line Winch
Line Pull(Bare Drum)	1,000 kgf
Max. Line Speed	40 meters/min
Wire Diameter	5mm
Drive	Hydraulic Motor
	The Rig is provided with a hydraulic winch for Handling of Drill Pipes.
Main Winch
Line Pull(Bare Drum)	3,000 kgf
Max. Line Speed	20 meters/min
Wire Diameter	16mm
Drive	Hydraulic Motor
	The Rig is provided with a hydraulic winch for Handling of casing Pipes.