Model: PDTHR-150
Technical Specifications:
Hydraulically driven triplex water injection pump for injection water / foam with necessary piping and flow control valves.
DTH Drilling | |
---|---|
Hole Diameter | 6” / 152mm (Continuous) |
Depth | 500 feet / 150 meters |
Rotary Drilling | |
Hole Diameter | 8 1/2” / 216mm |
Depth | 500 feet / 150 meters |
Drill Rod Length | 10 feet (3.0 meter) |
Truck | Ashok Leyland Make |
Engine Capacity | 160hp @ 2400 RPM |
Prime Mover | Truck Engine using PTO Gear box |
Application | Soft / Hard Rock (DTH) |
Unconsolidated / Alluvial (Rotary) | |
Mast | Sturdy structural channel mast structure electrically welded |
Feed System | Feed & Hoist using pulley, wire rope and hydraulic cylinder. |
Max. Pull up force | 7,000kg-f |
Max. Pull down force | 4,200kg-f |
Reeving Ratio | 1:2 |
Maximum Pull up speed | 30m/min |
Rotary Head | |
Spindle Speed | 0 – 100rpm |
Torque | 280 kg – m |
Hydraulic System | |
Maximum Working Pressure | 180 kg/cm2 |
Capacity | 450 Liters |
Air Compressor | ELGI– 600cfm @ 200psi. |
This Compressor is mounted on the same truck of the drill rig. | |
Mud Pump | |
Flow Rate | 1000 LPM |
Pressur | 10kg/cm2 |
Centrifugal Type hydraulically driven mud pump required for rotary drilling application | |
Levelling Stabilizers | |
Cylinder Bore | Ø125mm |
Stroke | 610 mm |
Box mounted type hydraulic levelling jacks | |
The above jacks are provided with “reverse flow restricted valves” to ensure safe operation. | |
Mast Rising Cylinder | |
Cylinder Bore | Ø100 mm |
Stroke | 700 mm |
The Drill Rig is equipped with a hydraulic cylinder for Raising & Lowering of the Mast Structure. | |
Breakout Wrench | |
Cylinder Bore | Ø70mm |
Stroke | 200mm |
The drill rig is equipped with hydraulic break out wrench for making and breaking of drill rods. | |
Water Injection | |
Maximum Flow | 50 LPM |
Pump | |
Maximum pressure | 40 kg/cm2 |
Airline lubricator | Suitable to 600cfm @ 200psi compressor. |
Paint | Epoxy & Polyurethane paint |
Anti- Corrosion to any type of environment epoxy paints to maintain the more life time of the equipment. |