Model: PDTHR-600
Technical Specifications:
Prime Mover: Truck | |
---|---|
Make | Ashok Leyland |
Drive | 6 x 4 |
Gross Vehicle weight | 25 MT |
Engine Rating | 230 HP @ 2400 rpm |
Prime Mover: Support Truck | |
Make | Ashok Leyland |
Drive | 6 x 2 |
Gross Vehicle weight | 16 MT |
Engine Rating | 160 HP @ 1800 rpm |
Air Compressor | |
Make | ELGI / Atlas Copco |
CFM | 1200 |
PSI | 350 (22 Bar) |
Drill Depth | |
Maximum Depth | 600Meters(2000Feet) |
Rod Handling | 6.0 inch(20 Feet) |
Hole Diameter | |
DTH | 165 – 355mm(6 1/2″- 14″) |
Rotary | 165 – 355mm(6”-14”) |
Mud Pump | |
Make | G&P/ Lakshmi |
Stroke | 150mm |
Liner Size | 150mm |
Mast | |
Max Capacity | 30 tons ( 67200 lbs ) |
Height | 9 mtr (29.7 ft) |
Rod handling capacity | 6.0 mtr (20 ft) |
Main Hoist Assembly | |
Line Pull ( Bare Drum) | 3000 Kgf |
Max Line Speed | 40 M/Minute |
Wire Dia | 16 mm |
Drive | Hydraulic |
Feed System | |
Pull Up | 11,500 Kgf |
Pull Down | 6,000 Kgf |
Hoisting Speed | 35 Mtr/Minute |
Water Injection Pump | |
Max Flow | 56 LPM |
Max Pressure | 30 kg/cm2 |
Auxillary Winch | |
Bare Drum Pull | 1000 Kgf |
Max Speed | 20 M/Minute |
Hydraulic Circuit | |
Max Operating Pressure | 220 kg/cm2 |
Hydraulic Tank Capacity | 600 Litres |
Filtration Non –Returnline | 10/25 Microns |
Rotary Head | |
Torque | 600 Kg-M |
Rotation Speed | 1 -100 Rpm |
Cylinders | |
Stabilizing Cylinders 4 Nos | 125 mm(Bore), 610 mm(Stroke) |
Mast Raising Cylinder | 100 mm(Bore), 800 mm(Stroke) |
Feed Cylinder | 140 mm(Bore), 2350 mm(Stroke) |
Break out Wrench | 80 mm(Bore), 300 mm(Stroke) |
RH Slide Out Cyliner | 80 mm(Bore), 450 mm(Stroke) |
Feed System | |
Pull Up | 18,635 Kgf |
Pull Down | 12,635 Kgf |
Hoisting Speed | 75 Mtr/Minute |