Hawks BLOCK MORTAR is a factory prepared blend of selected Raw materials, Portland cement and graded aggregates and polymer. Designed for use with water to produce high strength Thyrotrophic mortar for laying aerated light weight concrete ash Bricks, Cement hollow Blocks Cellular concrete blocks or smoothing over the block work surface in layers of up to 12mm thickness that meet and exceed the requirement of National and International standards.
ADVANTAGES : Long working time No curing required after Block work is done improved adhesion between two Blocks fast & economical.
AREAS OF APPLICATION : For Interior & Exterior use for preparing thin bed Block mortar for Aerated Light weight Concrete and Blocks.
SURFACE PREPARATION :
MIXING : The product can be mixed by hand or slow speed electric drill mixer (Less than 300 RPM) Pour water in a clean container & then add the powder until the mixture becomes creamy and plastic. Do mot over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need.
ADVANTAGES :
HAWKS BLOCK MORTAR can be used a thinnest adhesive to install tiles/stones on light weight Block/ Fly ash brick walls. Use a suitable trowel to achieve desired thickness of adhesive for installation of tiles / stones on the wall.
PACKING : 40 Kg.
SHELF LIFE : 1 Yrs.