Isolator built-in bacteria collector

model: STERT86 This type of bacteria collector is mainly used for sterility inspection experiments in the isolator cabin. It can be used with a variety of models and specifications of bacteria-collecting incubators. The sterility inspection operation can be performed on many sterile products. The whole machine is designed as an integrated type, the upper surface parts are completely sealed in the cabin, and the lower surface exposed to the outside of the cabin is mainly electrical parts. Main components: host, peristaltic pump, display screen, sample storage basket, drain tank, stepless speed control knob, foot switch. Technical characteristics





 

1. The main body shell is made of 304 stainless steel, which is easy to clean and maintain;
2. The drain tank can be used externally and on the table at the same time. When externally mounted, it can be selected at an angle greater than 180 degrees to meet the needs of experimenters with different operating habits;
3. The drain tank tray and The bottom groove can be split design. The bottom groove is integrally processed to form a large internal arc angle design, which allows smooth drainage, convenient cleaning and disinfection, and avoiding pollution. The drain tank can be completely removed, disassembled for cleaning and sterilization;
4. The palm-shaped sample storage basket is convenient for the placement of sample bottles and culture media bottles. The top of it is equipped with a soft bag hook to increase the height of the soft bag and avoid The soft bag touches the table;
5. The suspension rod of the sample placing basket can swing 360 degrees and move up and down, and the position can be adjusted according to actual needs;
6. The large screen display shows the current speed and time information. The screen display rod can be adjusted to the left and right;
7. Equipped with a foot switch to facilitate the operation of the experimenter.